~bzr-pqm/bzr/bzr.dev : contents of doc/developers/releasing.txt at revision 5447.2.1

~bzr-pqm/bzr/bzr.dev : (revision 5447.2.1)

Releasing Bazaar
################

This document describes the processes for making and announcing a Bazaar
release, and managing the release process. This is just one phase of the
`overall development cycle <http://doc.bazaar.canonical.com/developers/cycle.html>`_,
but it's the most complex part. This document gives a checklist you can
follow from start to end in one go.

If you're helping the Release Manager (RM) for one reason or another, you
may notice that he didn't follow that document scrupulously. He may have
good reasons to do that but he may also have missed some parts.

Follow the document yourself and don't hesitate to create the missing
milestones for example (we tend to forget these ones a lot).

.. contents::

Preconditions
=============

#. Download the pqm plugin and install it into your ``~/.bazaar/plugins``::

bzr branch lp:bzr-pqm ~/.bazaar/plugins/pqm

Release provisional planning
============================

We currently maintain four series. Concurrently releasing them all at the
same time makes it harder to shorten the delay between the source
availability and the package building longer than necessary (we delay the
official announcement until most of our users can install the new release).

In order to continue to do time-based releases, we need to plan the
releases by series to minimize the collisions.

We want to respect the following rules::

* the most recent series should release once a month,

* the most recent stable series should release every other month (based
on the amount of bug fixes, this can be shorter or longer depending
on the bugs importance),

* previous series should relesase on a a regular basis without
interfering with the most recent series with a decreasing order of
priority (again this should be based on bugs importance and user
feedback,

* the death of a series should be planned ahead of time. 6 months
should give enough time to our users to migrate to a more recent
series,

* there should not be more than 2 releases in the same week (but the
Release Manager is free to ignore this (get in touch with packagers
though),

* the series are aligned with Ubuntu releases for convenience since we
create a new series every 6 months. This means that we support the
stable series for 2 years. Note that we also propose the most recent
stable series via the ppa, so whether we keep supporting LTS directly
or via the ppa is still an open question.

2.3 series
----------

The 2.3 series has entered the beta phase and 2.3.0 should be released soon
enough to be included into Natty Narwhal. This gives the following expected
releases::

* 2.3.0: 2011-02-03

* 2.3rc2: 2011-01-06

* 2.3rc1: 2010-12-02

* 2.3b3: 2010-11-04

* 2.3b2: 2010-10-08

* 2.3.b1: 2010-09-19

2.2 series
----------

The 2.2 series is the current stable release and is included in Maverick
Meerkat. The planned releases are::

* 2.2.3: 2010-12-16

* 2.2.2: 2010-11-18

* 2.2.1: 2010-09-17

* 2.2.0: 2010-08-06

2.1 series
----------

The 2.1 series is the stable release included in Lucid Lynx. The planned
releases are::

* 2.1.6: 2011-01

* 2.1.5: 2010-12

* 2.1.4: 2010-11

* 2.1.3: 2010-09-16

* 2.1.2: 2010-05-27

* 2.1.1: 2010-03-02

* 2.1.0: 2010-02-11

2.0 series
----------

The 2.0 series is the stable release included in Karmic Koala. The planned
release are::

* 2.0.7: 2011-03 will be the last release for the 2.0 series.

* 2.0.6: 2010-09-16

* 2.0.5: 2010-03-22

* 2.0.4: 2010-01-21

* 2.0.3: 2009-12-14

* 2.0.2: 2009-11-02

* 2.0.1: 2009-10-14

* 2.0.0: 2009-09-21

At the start of a release cycle
===============================

To start a new release cycle:

#. If this is the first release for a given *x.y* then create a new
series at <https://launchpad.net/bzr/+addseries>. There is one series
for every *x.y* release.

#. If you made a new series, create a new pqm-controlled branch for this
release series, by asking a Canonical sysadmin. This branch means that
from the first release beta or candidate onwards, general development
continues on the trunk, and only specifically-targeted fixes go into
the release branch.

#. If you made a new series, add milestones at
<https://edge.launchpad.net/bzr/x.y/+addmilestone> to that series for
the beta release, release candidate and the final release, and their
expected dates.

#. Create a new milestone <https://edge.launchpad.net/bzr/x.y/+addmilestone>
and add information about this release. We will not use it yet, but it
will be available for targeting or nominating bugs.

#. Send mail to the list with the key dates, who will be the release
manager, and the main themes or targeted bugs. Ask people to nominate
objectives, or point out any high-risk things that are best done early,
or that interact with other changes. This is called the metronome mail
and is described in `Development cycles <cycle.html>`_.

#. Make a local branch for preparing this release. (Only for the first
release in a series, otherwise you should already have a branch.) ::

bzr branch trunk prepare-1.14

#. Configure pqm-submit for this branch, with a section like this (where
x.y is the version to release). **Or use hydrazine for easy use**
``~/.bazaar/locations.conf``::

[/home/mbp/bzr/prepare-x.y]
pqm_email = Canonical PQM <pqm@bazaar-vcs.org>
submit_branch = http://bazaar.launchpad.net/~bzr-pqm/bzr/x.y
parent_branch = http://bazaar.launchpad.net/~bzr-pqm/bzr/x.y
public_branch = http://bazaar.example.com/prepare-x.y
submit_to = bazaar@lists.canonical.com
smtp_server = mail.example.com:25

Please see <http://doc.bazaar.canonical.com/developers/HACKING.html#an-overview-of-pqm>
for more details on PQM

#. Update the version number in the ``bzr`` script, and the
``bzrlib/__init__.py`` file::

version_info = (x, y, z, 'dev', 0)

#. Add a new section at the top of ``NEWS`` about the new release,
including its version number and the headings from
``NEWS-template.txt``.

#. Update the "What's New" documents in ``doc/en/whats-new``.

#. Commit this and send it to PQM.

Doing a particular release
==========================

Update the source code
----------------------

#. Check that there is a milestone for the release you're doing. If there
is no milestone it indicates a process problem - make the milestone but
also mail the list to raise this issue in our process. Milestones are
found at <https://launchpad.net/bzr/+milestone/x.y.z>.

#. In the release branch, update ``version_info`` in ``./bzrlib/__init__.py``.
Make sure the corresponding milestone exists.
Double check that ./bzr ``_script_version`` matches ``version_info``. Check
the output of ``bzr --version``.

For beta releases use::

version_info = (2, 1, 0, 'beta', SERIAL)

For instance 2.1b1::

version_info = (2, 1, 0, 'beta', 1)

For release candidates use::

version_info = (2, 0, 1, 'candidate', SERIAL)

For stable releases use::

version_info = (2, 1, 2, 'final', 0)

#. Update the ``./NEWS`` section for this release.

Fill out the date and a description of the release under the existing
header. If there isn't one, follow the above for using the NEWS
template.

See *2.1.1* or similar for an example of what this looks like.

#. Add a summary of the release into the "What's New" document.

#. To check that all bugs mentioned in ``./NEWS`` are actually marked as
closed in Launchpad, you can run ``tools/check-newsbugs.py``::

./tools/check-newsbugs.py NEWS

(But note there will be many false positives, and this script may be
flaky <https://bugs.edge.launchpad.net/bzr/+bug/354985>. Don't let
this slow you down too much.)

#. Commit these changes to the release branch, using a command like::

bzr commit -m "Release 1.14."

The diff before you commit will be something like::

=== modified file 'NEWS'
--- NEWS 2008-09-17 23:09:18 +0000
+++ NEWS 2008-09-23 16:14:54 +0000
@@ -4,6 +4,23 @@

.. contents::

+bzr 1.7 2008-09-23
+------------------
+
+This release includes many bug fixes and a few performance and feature
+improvements. ``bzr rm`` will now scan for missing files and remove them,
+like how ``bzr add`` scans for unknown files and adds them. A bit more
+polish has been applied to the stacking code. The b-tree indexing code has
+been brought in, with an eye on using it in a future repository format.
+There are only minor installer changes since bzr-1.7rc2.
+
bzr 1.7rc2 2008-09-17
---------------------

=== modified file 'bzrlib/__init__.py'
--- bzrlib/__init__.py 2008-09-16 21:39:28 +0000
+++ bzrlib/__init__.py 2008-09-23 16:14:54 +0000
@@ -41,7 +41,7 @@
# Python version 2.0 is (2, 0, 0, 'final', 0)." Additionally we use a
# releaselevel of 'dev' for unreleased under-development code.

-version_info = (1, 7, 0, 'candidate', 2)
+version_info = (1, 7, 0, 'final', 0)

# API compatibility version: bzrlib is currently API compatible with 1.7.

Note that the NEWS file formatting has evolved, this example needs to
be updated.

#. Tag the new release::

bzr tag bzr-1.14

#. Push those changes to a bzr repository that is public and accessible on
the Internet. PQM will pull from this repository when it attempts to merge
your changes. Then submit those changes to PQM for merge into the
appropriate release branch::

bzr push
bzr pqm-submit -m "(mbp) prepare 1.14"

Or with hydrazine::

bzr lp-propose -m "Release 1.14" --approve lp:bzr/1.14
feed-pqm bzr

#. When PQM succeeds, pull down the master release branch.

Making the source tarball
-------------------------

#. Change into the source directory and run ::

make dist

#. Now we'll try expanding this tarball and running the test suite
to check for packaging problems::

make check-dist-tarball

You may encounter failures while running the test suite caused
by your locally installed plugins. Use your own judgment to
decide if you can release with these failures. When in doubt,
disable the faulty plugins one by one until you get no more
failures.

Remember that PQM has just tested everything too, this step is
particularly testing that the pyrex extensions, which are updated
by your local pyrex version when you run make dist, are in good
shape.

Publishing the source tarball
-----------------------------

#. Go to the relevant milestone page in Launchpad.

#. Create a release of the milestone, and upload the source tarball and
the GPG signature. Or, if you prefer, use the
``tools/packaging/lp-upload-release`` script to do this. Note that
this changes what the download widget on the Launchpad bzr home
page shows, so don't stop the release process yet, or platform binary
installers won't be made and the download list will stay very small!
<https://bugs.launchpad.net/launchpad/+bug/586445>

Announcing the source freeze
----------------------------

#. Post to the ``bazaar`` list, saying that the source has been frozen
(gone gold). Be extra clear that this is only a *source* release
targeted at packagers and installer builders (see
<https://bugs.launchpad.net/launchpad/+bug/645084>). This is the cue
for platform maintainers and plugin authors to update their code. This
is done before the general public announcement of the release.

Kick off the next cycle
-----------------------

#. To let developers work on the next release, do
`At the start of a release cycle` now.

#. Pause for a few days.

Publishing the release
----------------------

There is normally a delay of a few days after the source freeze to allow
for binaries to be built on various platforms. Once they have been built,
we have a releasable product. The next step is to make it generally
available to the world.

#. Go to the release web page at <https://launchpad.net/bzr/x.y/x.y.z>

#. Announce on the `Bazaar website <http://bazaar.canonical.com/>`_.
This page is edited via the lp:bzr-website branch. (Changes
pushed to this branch are refreshed by a cron job on escudero.)

#. Check that the documentation for this release is available in
<http://doc.bazaar.canonical.com>. It should be automatically build when the
branch is created, by a cron script ``update-bzr-docs`` on
``escudero``. As of today (2009-08-27) ``igc`` manually updates the
pretty version of it.

Announcing the release
----------------------

Now that the release is publicly available, tell people about it.

#. Make an announcement mail.

For release candidates or beta releases, this is sent to the ``bazaar``
list only to inform plugin authors and package or installer managers.

Once the installers are available, the mail can be sent to the
``bazaar-announce`` list too.

For final releases, it should also be cc'd to ``info-gnu@gnu.org``,
``python-announce-list@python.org``, ``bug-directory@gnu.org``.

In all cases, it is good to set ``Reply-To: bazaar@lists.canonical.com``,
so that people who reply to the announcement don't spam other lists.

The announce mail will look something like this::

Subject: bzr x.y.z released!

The Bazaar team is happy to announce availability of a new
release of the bzr adaptive version control system.
Bazaar is part of the GNU system <http://gnu.org/>.

<<Summary paragraph from news>>

Thanks to everyone who contributed patches, suggestions, and
feedback.

Bazaar is now available for download from
https://launchpad.net/bzr/2.x/2.x/ as a source tarball; packages
for various systems will be available soon.

<<NEWS section from this release back to the last major release>>

Feel free to tweak this to your taste.

#. Make an announcement through <https://launchpad.net/bzr/+announce>

#. Update the IRC channel topic. Use the ``/topic`` command to do this,
ensuring the new topic text keeps the project name, web site link, etc.

#. Announce on http://freshmeat.net/projects/bzr/

This should be done for beta releases, release candidates and final
releases. If you do not have a Freshmeat account yet, ask one of the
existing admins.

#. Update `<http://en.wikipedia.org/wiki/Bazaar_(software)>`_ -- this should
be done for final releases but not for beta releases or Release Candidates.

#. Update the python package index: <http://pypi.python.org/pypi/bzr> - best
done by running ::

python setup.py register

Remember to check the results afterwards.

To be able to register the release you must create an account on
<http://pypi.python.org/pypi> and have one of the existing owners of
the project add you to the group.

Merging the released code back to trunk
---------------------------------------

The rule is to keep ``NEWS`` sections sorted by date. You'll need to
review the merge and make sure that that is respected.

Merge the release branch back into the trunk. Check that changes in NEWS
were merged into the right sections. If it's not already done, advance
the version number in ``bzr`` and ``bzrlib/__init__.py``. Submit this
back into pqm for bzr.dev.

As soon as you change the version number in trunk, make sure you have
created the corresponding milestone to ensure the continuity in bug
targeting or nominating. Depending on the change, you may even have to
create a new series (if your change the major or minor release number), in
that case go to `At the start of a release cycle` and follow the instructions from there.

You should also merge (not pull) the release branch into
``lp:~bzr/bzr/current``, so that branch contains the current released code
at any time.

Releases until the final one
----------------------------

Congratulations - you have made your first release. Have a beer
or fruit juice - it's on the house! If it was a beta, or
candidate, you're not finished yet. Another beta or candidate or
hopefully a final release is still to come.

The process is the same as for the first release. Goto `Doing a
particular release`_ and follow the instructions again. Some details change
between beta, candidate and final releases, but they should be
documented. If the instructions aren't clear enough, please fix them.

Getting the release into Ubuntu
-------------------------------

(Feel free to propose or add new sections here about what we should do to
get bzr into other places.)

For the currently-under-development release of Ubuntu, no special action
is needed: the release should be picked by Debian and synced from there into
Ubuntu.

Releases off stable bzr branches should go in to the ``-updates`` of the
Ubuntu release that originally contained that branch. (Ubuntu Lucid had
bzr 2.2.0, so should get every 2.2.x update.) This means going through
the `SRU (Stable Release Updates)
<https://wiki.ubuntu.com/StableReleaseUpdates>`__ process.

As of September 2010, bzr has applied to the technical board to be added
to the `MicroReleaseExceptions
<https://wiki.ubuntu.com/StableReleaseUpdates/MicroReleaseExceptions>`__
category so that whole bugfix releases can more easily be approved.

**After making a bzr stable-release release, nominate the most serious bug
for the appropriate Ubuntu release and subscribe the `ubuntu-sru` team.**

This requires a couple of tricks (please reconsider and tweak as things
evolves from one release to the other):

* create a distro task with the ``Also affects distribution`` button and
select ``bzr (Ubuntu)``.

* change the *URL* to point to ``ubuntu/+source/bzr`` instead of ``bzr``
(this is needed if you create the distro task but not if it exists
already). You should now be able to click the ``Nominate for release``
button and select the right Ubuntu release. As of September 2010, this
means:

* ``maverick`` for the 2.2 series,
* ``lucid`` for the 2.1 series,
* ``karmic`` for the 2.0 series.

* Subscribe the ``~ubuntu-sru`` team to the bug.

* Add a comment targeted to ``~ubuntu-sru`` explaining the expectations
(we are targeting running the test suite during the build which, as of
September 2010, fails for known reasons that are currently addressed).
Search for bugs tagged with ``sru`` for examples and don't forget to tag
the bug you selected.