~bzr-pqm/bzr/bzr.dev

.. This file is in Python ReStructuredText format - it can be formatted
.. into HTML or text.  In the future we plan to extract the example commands
.. and automatically test them.

.. This text was previously on the wiki at 
.. http://bazaar.canonical.com/IntroductionToBzr
.. but has been moved into the source tree so it can be kept in sync with
.. the source and possibly automatically checked.

===============
Bazaar Tutorial
===============

Current for bzr-0.91, 2007-08


Introduction
============

If you are already familiar with decentralized revision control, then
please feel free to skip ahead to "Introducing Yourself to Bazaar". If,
on the other hand, you are familiar with revision control but not
decentralized revision control, then please start at "How DRCS is
different." Otherwise, get some coffee or tea, get comfortable and get
ready to catch up. 

The Purposes of Revision Control
================================

Odds are that you have worked on some sort of textual data -- the sources
to a program, web sites or the config files that Unix system
administrators have to deal with in /etc. The chances are also good that
you have made some sort of mistake that you deeply regretted. Perhaps you
deleted the configuration file for your mailserver or perhaps mauled the
source code for a pet project. Whatever happened, you have just deleted
important information that you would desperately like to get back. If this
has ever happened to you, then you are probably ready for Bazaar.

Revision control systems (which I'll henceforth call RCS) such as
Bazaar give you the ability to track changes for a directory by turning
it into something slightly more complicated than a directory that we call
a **branch**. The branch not only stores how the directory looks right
now, but also how it looked at various points in the past. Then, when you
do something you wish you hadn't, you can restore the directory to the way
it looked at some point in the past.

Revision control systems give users the ability to save changes to a
branch by "committing a **revision**". The revision created is essentially
a summary of the changes that were made since the last time the tree was
saved. 

These revisions have other uses as well. For example, one can comment
revisions to record what the recent set of changes meant by providing an
optional log message. Real life log messages include things like "Fixed
the web template to close the table" and "Added sftp suppport. Fixes #595"
	
We keep these logs so that if later there is some sort of problem with
sftp, we can figure out when the problem probably happened. 

How DRCS is Different
---------------------

Many Revision Control Systems (RCS) are stored on servers. If one wants to
work on the code stored within an RCS, then one needs to connect to the
server and "checkout" the code. Doing so gives one a directory in which a
person can make changes and then commit. The RCS client then connects to
the RCS server and stores the changes. This method is known as the
centralized model. 

The centralized model can have some drawbacks. A centralized RCS requires
that one is able to connect to the server whenever one wants to do version
control work. This can be a bit of a problem if your server is on some other
machine on the internet and you are not. Or, worse yet, you **are** on the
internet but the server is missing!

Decentralized Revision Control Systems (which I'll call DRCS after this
point) deal with this problem by keeping branches on the same machine as
the client. In Bazaar's case, the branch is kept in the same place as
the code that is being version controlled. This allows the user to save
his changes (**commit**) whenever he wants -- even if he is offline. The
user only needs internet access when he wants to access the changes in
someone else's branch that are somewhere else.

 
A common requirement that many people have is the need to keep track of
the changes for a directory such as file and subdirectory changes.
Performing this tracking by hand is a awkward process that over time
becomes unwieldy. That is, until one considers version control tools such
as Bazaar. These tools automate the process of storing data by creating
a **revision** of the directory tree whenever the user asks. 

Revision control software such as Bazaar can do much more than just
storage and performing undo.  For example, with Bazaar a developer can
take the modifications in one branch of software and apply them to a
related branch -- even if those changes exist in a branch owned by
somebody else. This allows developers to cooperate without giving
write access to the repository.

Bazaar remembers the ''ancestry'' of a revision: the previous revisions
that it is based upon.  A single revision may have more than one direct
descendant, each with different changes, representing a divergence in the
evolution of the tree. By branching, Bazaar allows multiple people to
cooperate on the evolution of a project, without all needing to work in
strict lock-step.  Branching can be useful even for a single developer.

Introducing yourself to Bazaar
==============================

Bazaar installs a single new command, **bzr**.  Everything else is a
subcommand of this.  You can get some help with ``bzr help``. Some arguments 
are grouped in topics: ``bzr help topics`` to see which topics are available.
There will be more in the future.

One function of a version control system is to keep track of who changed
what.  In a decentralized system, that requires an identifier for each
author that is globally unique.  Most people already have one of these: an
email address. Bzr is smart enough to automatically generate an email
address by looking up your username and hostname. If you don't like the
guess that Bazaar makes, then three options exist:

 1. Set an email address via ``bzr whoami``.  This is the simplest way.

    To set a global identity, use::
 
    % bzr whoami "Your Name <email@example.com>"
 
    If you'd like to use a different address for a specific branch, enter
    the branch folder and use::
 
    % bzr whoami --branch "Your Name <email@example.com>"
 
 #. Setting the email address in the ``~/.bazaar/bazaar.conf`` [1]_ by
    adding the following lines.  Please note that  ``[DEFAULT]`` is case
    sensitive::

        [DEFAULT]
        email=Your Name <email@isp.com>

    As above, you can override this settings on a branch by branch basis
    by creating a branch section in ``~/.bazaar/locations.conf`` and
    adding the following lines::

        [/the/path/to/the/branch]
        email=Your Name <email@isp.com>


 #. Overriding the two previous options by setting the global environment
    variable ``$BZR_EMAIL`` or ``$EMAIL`` (``$BZR_EMAIL`` will take
    precedence) to your full email address.

.. [1] On Windows, the users configuration files can be found in the
   application data directory. So instead of ``~/.bazaar/branch.conf``
   the configuration file can be found as: 
   ``C:\Documents and Settings\<username>\Application Data\Bazaar\2.0\branch.conf``.
   The same is true for ``locations.conf``, ``ignore``, and the
   ``plugins`` directory.

Creating a branch
=================

History is by default stored in the .bzr directory of the branch. In a
future version of Bazaar, there will be a facility to store it in a
separate repository, which may be remote.  We create a new branch by
running ``bzr init`` in an existing directory::

    % mkdir tutorial
    % cd tutorial
    % ls -a
    ./  ../
    % pwd
    /home/mbp/work/bzr.test/tutorial
    %
    % bzr init
    % ls -aF
    ./  ../  .bzr/
    %

As with CVS, there are three classes of file: unknown, ignored, and
versioned.  The **add** command makes a file versioned: that is, changes
to it will be recorded by the system::

    % echo 'hello world' > hello.txt
    % bzr status
    unknown:
      hello.txt
    % bzr add hello.txt
    added hello.txt
    % bzr status
    added:
      hello.txt


If you add the wrong file, simply use ``bzr remove`` to make it
unversioned again.  This does not delete the working copy in this case,
though it may in others [2]_.

.. [2] ``bzr remove`` will remove the working copy if it is currently
   versioned, but has no changes from the last committed version.  You
   can force the file to always be kept with the ``--keep`` option to
   ``bzr remove``, or force it to always be deleted with ``--force``.

Branch locations
================

All history is stored in a branch, which is just an on-disk directory
containing control files.  By default there is no separate repository or
database as used in svn or svk. You can choose to create a repository if
you want to (see the ``bzr init-repo`` command). You may wish to do this
if you have very large branches, or many branches of a moderately sized
project.

You'll usually refer to branches on your computer's filesystem just by
giving the name of the directory containing the branch.  bzr also supports
accessing branches over http and sftp, for example::

    % bzr log http://bazaar-vcs.org/bzr/bzr.dev/
    % bzr log sftp://bazaar-vcs.org/bzr/bzr.dev/

By installing bzr plugins you can also access branches using the rsync
protocol.

See the `Publishing your branch`_ section for more about how to put your
branch at a given location.

Reviewing changes
=================

Once you have completed some work, you will want to **commit** it to the
version history.  It is good to commit fairly often: whenever you get a
new feature working, fix a bug, or improve some code or documentation.
It's also a good practice to make sure that the code compiles and passes
its test suite before committing, to make sure that every revision is a
known-good state.  You can also review your changes, to make sure you're
committing what you intend to, and as a chance to rethink your work before
you permanently record it. 

Two bzr commands are particularly useful here: **status** and **diff**.  

bzr status
----------

The **status** command tells you what changes have been made to the
working directory since the last revision::

    % bzr status
    modified:
       foo

``bzr status`` hides "boring" files that are either unchanged or ignored.
The status command can optionally be given the name of some files or
directories to check.

bzr diff
--------

The **diff** command shows the full text of changes to all files as a
standard unified diff.  This can be piped through many programs such as
''patch'', ''diffstat'', ''filterdiff'' and ''colordiff''::

    % bzr diff
    === added file 'hello.txt'
    --- hello.txt   1970-01-01 00:00:00 +0000
    +++ hello.txt   2005-10-18 14:23:29 +0000
    @@ -0,0 +1,1 @@
    +hello world


With the ``-r`` option, the tree is compared to an earlier revision, or
the differences between two versions are shown::

    % bzr diff -r 1000..          # everything since r1000
    % bzr diff -r 1000..1100      # changes from 1000 to 1100

The ``--diff-options`` option causes bzr to run the external diff program,
passing options.  For example::

    % bzr diff --diff-options --side-by-side foo

Some projects prefer patches to show a prefix at the start of the path
for old and new files.  The ``--prefix`` option can be used to provide
such a prefix.
As a shortcut, ``bzr diff -p1`` produces a form that works with the 
command ``patch -p1``.

Committing changes
==================

When the working tree state is satisfactory, it can be **committed** to
the branch, creating a new revision holding a snapshot of that state.  

bzr commit
----------

The **commit** command takes a message describing the changes in the
revision.  It also records your userid, the current time and timezone, and
the inventory and contents of the tree.  The commit message is specified
by the ``-m`` or ``--message`` option. You can enter a multi-line commit
message; in most shells you can enter this just by leaving the quotes open
at the end of the line.

::

    % bzr commit -m "added my first file"

You can also use the ``-F`` option to take the message from a file.  Some
people like to make notes for a commit message while they work, then
review the diff to make sure they did what they said they did.  (This file
can also be useful when you pick up your work after a break.)

Message from an editor
======================

If you use neither the ``-m`` nor the ``-F`` option then bzr will open an
editor for you to enter a message.  The editor to run is controlled by
your ``$VISUAL`` or ``$EDITOR`` environment variable, which can be overridden
by the ``editor`` setting in ``~/.bazaar/bazaar.conf``; ``$BZR_EDITOR`` will
override either of the above mentioned editor options.  If you quit the
editor without making any changes, the commit will be cancelled.

The file that is opened in the editor contains a horizontal line. The part
of the file below this line is included for information only, and will not
form part of the commit message. Below the separator is shown the list of
files that are changed in the commit. You should write your message above
the line, and then save the file and exit.

If you would like to see the diff that will be committed as you edit the
message you can use the ``--show-diff`` option to ``commit``. This will include
the diff in the editor when it is opened, below the separator and the
information about the files that will be committed. This means that you can
read it as you write the message, but the diff itself wont be seen in the
commit message when you have finished. If you would like parts to be
included in the message you can copy and paste them above the separator.

Selective commit
----------------

If you give file or directory names on the commit command line then only
the changes to those files will be committed.  For example::

    % bzr commit -m "documentation fix" commit.py

By default bzr always commits all changes to the tree, even if run from a
subdirectory.  To commit from only the current directory down, use::

    % bzr commit .


Removing uncommitted changes
============================

If you've made some changes and don't want to keep them, use the
**revert** command to go back to the previous head version.  It's a good
idea to use ``bzr diff`` first to see what will be removed. By default the
revert command reverts the whole tree; if file or directory names are
given then only those ones will be affected. ``bzr revert`` also clears the
list of pending merges revisions.

Ignoring files
==============

Many source trees contain some files that do not need to be versioned,
such as editor backups, object or bytecode files, and built programs.  You
can simply not add them, but then they'll always crop up as unknown files.
You can also tell bzr to ignore these files by adding them to a file
called ``.bzrignore`` at the top of the tree.

This file contains a list of file wildcards (or "globs"), one per line.
Typical contents are like this::

    *.o
    *~
    *.tmp
    *.py[co]

If a glob contains a slash, it is matched against the whole path from the
top of the tree; otherwise it is matched against only the filename.  So
the previous example ignores files with extension ``.o`` in all
subdirectories, but this example ignores only ``config.h`` at the top level
and HTML files in ``doc/``::

    ./config.h
    doc/*.html

To get a list of which files are ignored and what pattern they matched,
use ``bzr ignored``::

    % bzr ignored
    config.h                 ./config.h
    configure.in~            *~

It is OK to have either an ignore pattern match a versioned file, or to
add an ignored file.  Ignore patterns have no effect on versioned files;
they only determine whether unversioned files are reported as unknown or
ignored.

The ``.bzrignore`` file should normally be versioned, so that new copies
of the branch see the same patterns::

    % bzr add .bzrignore
    % bzr commit -m "Add ignore patterns"


Global Ignores
--------------

There are some ignored files which are not project specific, but more user
specific. Things like editor temporary files, or personal temporary files.
Rather than add these ignores to every project, bzr supports a global
ignore file in ``~/.bazaar/ignore`` [1]_. It has the same syntax as the
per-project ignore file.


Examining history
=================

bzr log
-------

The ``bzr log`` command shows a list of previous revisions. The ``bzr log
--forward`` command does the same in chronological order to get most
recent revisions printed at last.

As with ``bzr diff``, ``bzr log`` supports the ``-r`` argument::

    % bzr log -r 1000..          # Revision 1000 and everything after it
    % bzr log -r ..1000          # Everything up to and including r1000
    % bzr log -r 1000..1100      # changes from 1000 to 1100
    % bzr log -r 1000            # The changes in only revision 1000


Branch statistics
=================

The ``bzr info`` command shows some summary information about the working
tree and the branch history.  


Versioning directories
======================

bzr versions files and directories in a way that can keep track of renames
and intelligently merge them::

    % mkdir src
    % echo 'int main() {}' > src/simple.c
    % bzr add src
    added src
    added src/simple.c
    % bzr status
    added:
      src/
      src/simple.c


Deleting and removing files
===========================

You can delete files or directories by just deleting them from the working
directory.  This is a bit different to CVS, which requires that you also
do ``cvs remove``.

    ``bzr remove`` makes the file un-versioned, but may or may not delete
    the working copy [2]_.  This is useful when you add the wrong file,
    or decide that a file should actually not be versioned. 

::

    % rm -r src
    % bzr remove -v hello.txt
    ?       hello.txt
    % bzr status
    removed:
      hello.txt
      src/
      src/simple.c
    unknown:
      hello.txt

If you remove the wrong file by accident, you can use ``bzr revert`` to
restore it.


Branching
=========

Often rather than starting your own project, you will want to submit a
change to an existing project.  To do this, you'll need to get a copy of
the existing branch.  Because this new copy is potentially a new branch,
the command is called **branch**::

    % bzr branch http://bazaar-vcs.org/bzr/bzr.dev 
    % cd bzr.dev

This copies down the complete history of this branch, so we can do all
operations on it locally: log, annotate, making and merging branches.
There will be an option to get only part of the history if you wish.

You can also get a copy of an existing branch by copying its directory,
expanding a tarball, or by a remote copy using something like rsync.

Following upstream changes
==========================

You can stay up-to-date with the parent branch by "pulling" in their
changes::

    % bzr pull

After this change, the local directory will be a mirror of the source. This
includes the ''revision-history'' - which is a list of the commits done in 
this branch, rather than merged from other branches.

This command only works if your local (destination) branch is either an
older copy of the parent branch with no new commits of its own, or if the
most recent commit in your local branch has been merged into the parent
branch.

Merging from related branches
=============================

If two branches have diverged (both have unique changes) then ``bzr
merge`` is the appropriate command to use. Merge will automatically
calculate the changes that exist in the branch you're merging from that
are not in your branch and attempt to apply them in your branch.

::

  % bzr merge URL


If there is a conflict during a merge, 3 files with the same basename
are created. The filename of the common base is appended with ".BASE",
the filename of the file containing your changes is appended with
".THIS" and the filename with the changes from the other tree is
appended with ".OTHER".  Using a program such as kdiff3, you can now
comfortably merge them into one file.  In order to commit you have to
rename the merged file (".THIS") to the original file name.  To
complete the conflict resolution you must use the resolve command,
which will remove the ".OTHER" and ".BASE" files.  As long as there
exist files with .BASE, .THIS or .OTHER the commit command will
report an error.

::

  % kdiff3 file.BASE file.OTHER file.THIS
  % mv file.THIS file
  % bzr resolve file

[**TODO**: explain conflict markers within files]


Publishing your branch
======================

You don't need a special server to publish a bzr branch, just a normal web
server.  Just mirror the files to your server, including the .bzr
directory.  One can push a branch (or the changes for a branch) by one of
the following three methods:

* The best method is to use bzr itself to do it.

  ::

    % bzr push sftp://servername.com/path/to/directory 

  (The destination directory must already exist unless the
  ``--create-prefix`` option is used.)

* Another option is the ``rspush`` plugin that comes with BzrTools, which
  uses rsync to push the changes to the revision history and the working
  tree.

You can also use copy the files around manually, by sending a tarball, or
using rsync, or other related file transfer methods.  This is usually
less safe than using ``push``, but may be faster or easier in some
situations.

Moving changes between trees 
============================

It happens to the best of us: sometimes you'll make changes in the wrong
tree.  Maybe because you've accidentally started work in the wrong directory,
maybe because as you're working, the change turns out to be bigger than you
expected, so you start a new branch for it.

To move your changes from one tree to another, use

::

  % cd NEWDIR
  % bzr merge --uncommitted OLDDIR

This will apply all of the uncommitted changes you made in OLDDIR to NEWDIR.
It will not apply committed changes, even if they could be applied to NEWDIR
with a regular merge.  The changes will remain in OLDDIR, but you can use ``bzr
revert OLDDIR`` to remove them, once you're satisfied with NEWDIR.

NEWDIR does not have to be a copy of OLDDIR, but they should be related.
The more different they are, the greater the chance of conflicts.