7
(The current version of this document is available in the file
8
``doc/developers/HACKING.txt`` in the source tree, or at
9
http://doc.bazaar-vcs.org/bzr.dev/en/developer-guide/HACKING.html)
15
Exploring the Bazaar Platform
16
=============================
18
Before making changes, it's a good idea to explore the work already
19
done by others. Perhaps the new feature or improvement you're looking
20
for is available in another plug-in already? If you find a bug,
21
perhaps someone else has already fixed it?
23
To answer these questions and more, take a moment to explore the
24
overall Bazaar Platform. Here are some links to browse:
26
* The Plugins page on the Wiki - http://bazaar-vcs.org/BzrPlugins
28
* The Bazaar product family on Launchpad - https://launchpad.net/bazaar
30
* Bug Tracker for the core product - https://bugs.launchpad.net/bzr/
32
* Blueprint Tracker for the core product - https://blueprints.launchpad.net/bzr/
34
If nothing else, perhaps you'll find inspiration in how other developers
35
have solved their challenges.
38
Planning and Discussing Changes
39
===============================
41
There is a very active community around Bazaar. Mostly we meet on IRC
42
(#bzr on irc.freenode.net) and on the mailing list. To join the Bazaar
43
community, see http://bazaar-vcs.org/BzrSupport.
45
If you are planning to make a change, it's a very good idea to mention it
46
on the IRC channel and/or on the mailing list. There are many advantages
47
to involving the community before you spend much time on a change.
50
* you get to build on the wisdom on others, saving time
52
* if others can direct you to similar code, it minimises the work to be done
54
* it assists everyone in coordinating direction, priorities and effort.
56
In summary, maximising the input from others typically minimises the
57
total effort required to get your changes merged. The community is
58
friendly, helpful and always keen to welcome newcomers.
61
Bazaar Development in a Nutshell
62
================================
64
Looking for a 10 minute introduction to submitting a change?
65
See http://bazaar-vcs.org/BzrGivingBack.
67
TODO: Merge that Wiki page into this document.
70
Understanding the Development Process
71
=====================================
73
The development team follows many best-practices including:
75
* a public roadmap and planning process in which anyone can participate
77
* time based milestones everyone can work towards and plan around
79
* extensive code review and feedback to contributors
81
* complete and rigorous test coverage on any code contributed
83
* automated validation that all tests still pass before code is merged
84
into the main code branch.
86
The key tools we use to enable these practices are:
88
* Launchpad - https://launchpad.net/
90
* Bazaar - http://bazaar-vcs.org/
92
* Bundle Buggy - http://bundlebuggy.aaronbentley.com/
94
* Patch Queue Manager - https://launchpad.net/pqm/
96
For further information, see http://bazaar-vcs.org/BzrDevelopment.
99
A Closer Look at the Merge & Review Process
100
===========================================
102
If you'd like to propose a change, please post to the
103
bazaar@lists.canonical.com list with a bundle, patch, or link to a
104
branch. Put '[PATCH]' or '[MERGE]' in the subject so Bundle Buggy
105
can pick it out, and explain the change in the email message text.
106
Remember to update the NEWS file as part of your change if it makes any
107
changes visible to users or plugin developers. Please include a diff
108
against mainline if you're giving a link to a branch.
110
You can generate a bundle like this::
112
bzr bundle > mybundle.patch
114
A .patch extension is recommended instead of .bundle as many mail clients
115
will send the latter as a binary file. If a bundle would be too long or your
116
mailer mangles whitespace (e.g. implicitly converts Unix newlines to DOS
117
newlines), use the merge-directive command instead like this::
119
bzr merge-directive http://bazaar-vcs.org http://example.org/my_branch > my_directive.patch
121
See the help for details on the arguments to merge-directive.
123
Please do **NOT** put [PATCH] or [MERGE] in the subject line if you don't
124
want it to be merged. If you want comments from developers rather than
125
to be merged, you can put '[RFC]' in the subject line.
127
Anyone is welcome to review code. There are broadly three gates for
130
* Doesn't reduce test coverage: if it adds new methods or commands,
131
there should be tests for them. There is a good test framework
132
and plenty of examples to crib from, but if you are having trouble
133
working out how to test something feel free to post a draft patch
136
* Doesn't reduce design clarity, such as by entangling objects
137
we're trying to separate. This is mostly something the more
138
experienced reviewers need to help check.
140
* Improves bugs, features, speed, or code simplicity.
142
Code that goes in should pass all three. The core developers take care
143
to keep the code quality high and understandable while recognising that
144
perfect is sometimes the enemy of good. (It is easy for reviews to make
145
people notice other things which should be fixed but those things should
146
not hold up the original fix being accepted. New things can easily be
147
recorded in the Bug Tracker instead.)
149
Anyone can "vote" on the mailing list. Core developers can also vote using
150
Bundle Buggy. Here are the voting codes and their explanations.
152
:approve: Reviewer wants this submission merged.
153
:tweak: Reviewer wants this submission merged with small changes. (No
155
:abstain: Reviewer does not intend to vote on this patch.
156
:resubmit: Please make changes and resubmit for review.
157
:reject: Reviewer doesn't want this kind of change merged.
158
:comment: Not really a vote. Reviewer just wants to comment, for now.
160
If a change gets two approvals from core reviewers, and no rejections,
161
then it's OK to come in. Any of the core developers can bring it into the
162
bzr.dev trunk and backport it to maintenance branches if required. The
163
Release Manager will merge the change into the branch for a pending
164
release, if any. As a guideline, core developers usually merge their own
165
changes and volunteer to merge other contributions if they were the second
166
reviewer to agree to a change.
168
To track the progress of proposed changes, use Bundle Buggy. See
169
http://bundlebuggy.aaronbentley.com/help for a link to all the
170
outstanding merge requests together with an explanation of the columns.
171
Bundle Buggy will also mail you a link to track just your change.
174
Preparing a Sandbox for Making Changes to Bazaar
175
================================================
177
Bazaar supports many ways of organising your work. See
178
http://bazaar-vcs.org/SharedRepositoryLayouts for a summary of the
179
popular alternatives.
181
Of course, the best choice for you will depend on numerous factors:
182
the number of changes you may be making, the complexity of the changes, etc.
183
As a starting suggestion though:
185
* create a local copy of the main development branch (bzr.dev) by using
188
bzr branch http://bazaar-vcs.org/bzr/bzr.dev/ bzr.dev
190
* keep your copy of bzr.dev prestine (by not developing in it) and keep
191
it up to date (by using bzr pull)
193
* create a new branch off your local bzr.dev copy for each issue
194
(bug or feature) you are working on.
196
This approach makes it easy to go back and make any required changes
197
after a code review. Resubmitting the change is then simple with no
198
risk of accidentially including edits related to other issues you may
199
be working on. After the changes for an issue are accepted and merged,
200
the associated branch can be deleted or archived as you wish.
203
Navigating the Code Base
204
========================
206
TODO: List and describe in one line the purpose of each directory
207
inside an installation of bzr.
209
TODO: Refer to a central location holding an up to date copy of the API
210
documentation generated by epydoc, e.g. something like
211
http://starship.python.net/crew/mwh/bzrlibapi/bzrlib.html.
217
The Importance of Testing
218
=========================
220
Reliability is a critical success factor for any Version Control System.
221
We want Bazaar to be highly reliable across multiple platforms while
222
evolving over time to meet the needs of its community.
224
In a nutshell, this is want we expect and encourage:
226
* New functionality should have test cases. Preferably write the
227
test before writing the code.
229
In general, you can test at either the command-line level or the
230
internal API level. See Writing tests below for more detail.
232
* Try to practice Test-Driven Development: before fixing a bug, write a
233
test case so that it does not regress. Similarly for adding a new
234
feature: write a test case for a small version of the new feature before
235
starting on the code itself. Check the test fails on the old code, then
236
add the feature or fix and check it passes.
238
By doing these things, the Bazaar team gets increased confidence that
239
changes do what they claim to do, whether provided by the core team or
240
by community members. Equally importantly, we can be surer that changes
241
down the track do not break new features or bug fixes that you are
244
As of May 2007, Bazaar ships with a test suite containing over 6000 tests
245
and growing. We are proud of it and want to remain so. As community
246
members, we all benefit from it. Would you trust version control on
247
your project to a product *without* a test suite like Bazaar has?
250
Running the Test Suite
251
======================
253
Currently, bzr selftest is used to invoke tests.
254
You can provide a pattern argument to run a subset. For example,
255
to run just the blackbox tests, run::
257
./bzr selftest -v blackbox
259
To skip a particular test (or set of tests), use the --exclude option
260
(shorthand -x) like so::
262
./bzr selftest -v -x blackbox
264
To ensure that all tests are being run and succeeding, you can use the
265
--strict option which will fail if there are any missing features or known
268
./bzr selftest --strict
270
To list tests without running them, use the --list-only option like so::
272
./bzr selftest --list-only
274
This option can be combined with other selftest options (like -x) and
275
filter patterns to understand their effect.
281
In general tests should be placed in a file named test_FOO.py where
282
FOO is the logical thing under test. That file should be placed in the
283
tests subdirectory under the package being tested.
285
For example, tests for merge3 in bzrlib belong in bzrlib/tests/test_merge3.py.
286
See bzrlib/tests/test_sampler.py for a template test script.
288
Tests can be written for the UI or for individual areas of the library.
289
Choose whichever is appropriate: if adding a new command, or a new command
290
option, then you should be writing a UI test. If you are both adding UI
291
functionality and library functionality, you will want to write tests for
292
both the UI and the core behaviours. We call UI tests 'blackbox' tests
293
and they are found in ``bzrlib/tests/blackbox/*.py``.
295
When writing blackbox tests please honour the following conventions:
297
1. Place the tests for the command 'name' in
298
bzrlib/tests/blackbox/test_name.py. This makes it easy for developers
299
to locate the test script for a faulty command.
301
2. Use the 'self.run_bzr("name")' utility function to invoke the command
302
rather than running bzr in a subprocess or invoking the
303
cmd_object.run() method directly. This is a lot faster than
304
subprocesses and generates the same logging output as running it in a
305
subprocess (which invoking the method directly does not).
307
3. Only test the one command in a single test script. Use the bzrlib
308
library when setting up tests and when evaluating the side-effects of
309
the command. We do this so that the library api has continual pressure
310
on it to be as functional as the command line in a simple manner, and
311
to isolate knock-on effects throughout the blackbox test suite when a
312
command changes its name or signature. Ideally only the tests for a
313
given command are affected when a given command is changed.
315
4. If you have a test which does actually require running bzr in a
316
subprocess you can use ``run_bzr_subprocess``. By default the spawned
317
process will not load plugins unless ``--allow-plugins`` is supplied.
323
We make selective use of doctests__. In general they should provide
324
*examples* within the API documentation which can incidentally be tested. We
325
don't try to test every important case using doctests -- regular Python
326
tests are generally a better solution.
328
Most of these are in ``bzrlib/doc/api``. More additions are welcome.
330
__ http://docs.python.org/lib/module-doctest.html
333
Skipping tests and test requirements
334
------------------------------------
336
In our enhancements to unittest we allow for some addition results beyond
337
just success or failure.
339
If a test can't be run, it can say that it's skipped. This is typically
340
used in parameterized tests - for example if a transport doesn't support
341
setting permissions, we'll skip the tests that relating to that. ::
344
return self.branch_format.initialize(repo.bzrdir)
345
except errors.UninitializableFormat:
346
raise tests.TestSkipped('Uninitializable branch format')
348
Raising TestSkipped is a good idea when you want to make it clear that the
349
test was not run, rather than just returning which makes it look as if it
352
Several different cases are distinguished:
355
Generic skip; the only type that was present up to bzr 0.18.
358
The test doesn't apply to the parameters with which it was run.
359
This is typically used when the test is being applied to all
360
implementations of an interface, but some aspects of the interface
361
are optional and not present in particular concrete
362
implementations. (Some tests that should raise this currently
363
either silently return or raise TestSkipped.) Another option is
364
to use more precise parameterization to avoid generating the test
368
**(Not implemented yet)**
369
The test can't be run because of an inherent limitation of the
370
environment, such as not having symlinks or not supporting
374
The test can't be run because a dependency (typically a Python
375
library) is not available in the test environment. These
376
are in general things that the person running the test could fix
377
by installing the library. It's OK if some of these occur when
378
an end user runs the tests or if we're specifically testing in a
379
limited environment, but a full test should never see them.
382
The test exists but is known to fail, for example because the
383
code to fix it hasn't been run yet. Raising this allows
384
you to distinguish these failures from the ones that are not
385
expected to fail. This could be conditionally raised if something
386
is broken on some platforms but not on others.
388
We plan to support three modes for running the test suite to control the
389
interpretation of these results. Strict mode is for use in situations
390
like merges to the mainline and releases where we want to make sure that
391
everything that can be tested has been tested. Lax mode is for use by
392
developers who want to temporarily tolerate some known failures. The
393
default behaviour is obtained by ``bzr selftest`` with no options, and
394
also (if possible) by running under another unittest harness.
396
======================= ======= ======= ========
397
result strict default lax
398
======================= ======= ======= ========
399
TestSkipped pass pass pass
400
TestNotApplicable pass pass pass
401
TestPlatformLimit pass pass pass
402
TestDependencyMissing fail pass pass
403
KnownFailure fail pass pass
404
======================= ======= ======= ========
407
Test feature dependencies
408
-------------------------
410
Rather than manually checking the environment in each test, a test class
411
can declare its dependence on some test features. The feature objects are
412
checked only once for each run of the whole test suite.
414
For historical reasons, as of May 2007 many cases that should depend on
415
features currently raise TestSkipped.)
419
class TestStrace(TestCaseWithTransport):
421
_test_needs_features = [StraceFeature]
423
This means all tests in this class need the feature. The feature itself
424
should provide a ``_probe`` method which is called once to determine if
427
These should generally be equivalent to either TestDependencyMissing or
428
sometimes TestPlatformLimit.
434
Known failures are when a test exists but we know it currently doesn't
435
work, allowing the test suite to still pass. These should be used with
436
care, we don't want a proliferation of quietly broken tests. It might be
437
appropriate to use them if you've committed a test for a bug but not the
438
fix for it, or if something works on Unix but not on Windows.
441
Testing exceptions and errors
442
-----------------------------
444
It's important to test handling of errors and exceptions. Because this
445
code is often not hit in ad-hoc testing it can often have hidden bugs --
446
it's particularly common to get NameError because the exception code
447
references a variable that has since been renamed.
449
.. TODO: Something about how to provoke errors in the right way?
451
In general we want to test errors at two levels:
453
1. A test in ``test_errors.py`` checking that when the exception object is
454
constructed with known parameters it produces an expected string form.
455
This guards against mistakes in writing the format string, or in the
456
``str`` representations of its parameters. There should be one for
457
each exception class.
459
2. Tests that when an api is called in a particular situation, it raises
460
an error of the expected class. You should typically use
461
``assertRaises``, which in the Bazaar test suite returns the exception
462
object to allow you to examine its parameters.
464
In some cases blackbox tests will also want to check error reporting. But
465
it can be difficult to provoke every error through the commandline
466
interface, so those tests are only done as needed -- eg in response to a
467
particular bug or if the error is reported in an unusual way(?) Blackbox
468
tests should mostly be testing how the command-line interface works, so
469
should only test errors if there is something particular to the cli in how
470
they're displayed or handled.
473
Interface implementation testing and test scenarios
474
---------------------------------------------------
476
There are several cases in Bazaar of multiple implementations of a common
477
conceptual interface. ("Conceptual" because
478
it's not necessary for all the implementations to share a base class,
479
though they often do.) Examples include transports and the working tree,
480
branch and repository classes.
482
In these cases we want to make sure that every implementation correctly
483
fulfils the interface requirements. For example, every Transport should
484
support the ``has()`` and ``get()`` and ``clone()`` methods. We have a
485
sub-suite of tests in ``test_transport_implementations``. (Most
486
per-implementation tests are in submodules of ``bzrlib.tests``, but not
487
the transport tests at the moment.)
489
These tests are repeated for each registered Transport, by generating a
490
new TestCase instance for the cross product of test methods and transport
491
implementations. As each test runs, it has ``transport_class`` and
492
``transport_server`` set to the class it should test. Most tests don't
493
access these directly, but rather use ``self.get_transport`` which returns
494
a transport of the appropriate type.
496
The goal is to run per-implementation only tests that relate to that
497
particular interface. Sometimes we discover a bug elsewhere that happens
498
with only one particular transport. Once it's isolated, we can consider
499
whether a test should be added for that particular implementation,
500
or for all implementations of the interface.
502
The multiplication of tests for different implementations is normally
503
accomplished by overriding the ``test_suite`` function used to load
504
tests from a module. This function typically loads all the tests,
505
then applies a TestProviderAdapter to them, which generates a longer
506
suite containing all the test variations.
512
Some utilities are provided for generating variations of tests. This can
513
be used for per-implementation tests, or other cases where the same test
514
code needs to run several times on different scenarios.
516
The general approach is to define a class that provides test methods,
517
which depend on attributes of the test object being pre-set with the
518
values to which the test should be applied. The test suite should then
519
also provide a list of scenarios in which to run the tests.
521
Typically ``multiply_tests_from_modules`` should be called from the test
522
module's ``test_suite`` function.
525
Essential Domain Classes
526
########################
528
Introducing the Object Model
529
============================
531
The core domain objects within the bazaar model are:
541
Transports are explained below. See http://bazaar-vcs.org/Classes/
542
for an introduction to the other key classes.
547
The ``Transport`` layer handles access to local or remote directories.
548
Each Transport object acts like a logical connection to a particular
549
directory, and it allows various operations on files within it. You can
550
*clone* a transport to get a new Transport connected to a subdirectory or
553
Transports are not used for access to the working tree. At present
554
working trees are always local and they are accessed through the regular
555
Python file io mechanisms.
560
Transports work in URLs. Take note that URLs are by definition only
561
ASCII - the decision of how to encode a Unicode string into a URL must be
562
taken at a higher level, typically in the Store. (Note that Stores also
563
escape filenames which cannot be safely stored on all filesystems, but
564
this is a different level.)
566
The main reason for this is that it's not possible to safely roundtrip a
567
URL into Unicode and then back into the same URL. The URL standard
568
gives a way to represent non-ASCII bytes in ASCII (as %-escapes), but
569
doesn't say how those bytes represent non-ASCII characters. (They're not
570
guaranteed to be UTF-8 -- that is common but doesn't happen everywhere.)
572
For example if the user enters the url ``http://example/%e0`` there's no
573
way to tell whether that character represents "latin small letter a with
574
grave" in iso-8859-1, or "latin small letter r with acute" in iso-8859-2
575
or malformed UTF-8. So we can't convert their URL to Unicode reliably.
577
Equally problematic if we're given a url-like string containing non-ascii
578
characters (such as the accented a) we can't be sure how to convert that
579
to the correct URL, because we don't know what encoding the server expects
580
for those characters. (Although this is not totally reliable we might still
581
accept these and assume they should be put into UTF-8.)
583
A similar edge case is that the url ``http://foo/sweet%2Fsour`` contains
584
one directory component whose name is "sweet/sour". The escaped slash is
585
not a directory separator. If we try to convert URLs to regular Unicode
586
paths this information will be lost.
588
This implies that Transports must natively deal with URLs; for simplicity
589
they *only* deal with URLs and conversion of other strings to URLs is done
590
elsewhere. Information they return, such as from ``list_dir``, is also in
591
the form of URL components.
600
We have a commitment to 6 months API stability - any supported symbol in a
601
release of bzr MUST NOT be altered in any way that would result in
602
breaking existing code that uses it. That means that method names,
603
parameter ordering, parameter names, variable and attribute names etc must
604
not be changed without leaving a 'deprecated forwarder' behind. This even
605
applies to modules and classes.
607
If you wish to change the behaviour of a supported API in an incompatible
608
way, you need to change its name as well. For instance, if I add an optional keyword
609
parameter to branch.commit - that's fine. On the other hand, if I add a
610
keyword parameter to branch.commit which is a *required* transaction
611
object, I should rename the API - i.e. to 'branch.commit_transaction'.
613
When renaming such supported API's, be sure to leave a deprecated_method (or
614
_function or ...) behind which forwards to the new API. See the
615
bzrlib.symbol_versioning module for decorators that take care of the
616
details for you - such as updating the docstring, and issuing a warning
617
when the old api is used.
619
For unsupported API's, it does not hurt to follow this discipline, but it's
620
not required. Minimally though, please try to rename things so that
621
callers will at least get an AttributeError rather than weird results.
624
Deprecation decorators
625
----------------------
627
``bzrlib.symbol_versioning`` provides decorators that can be attached to
628
methods, functions, and other interfaces to indicate that they should no
631
To deprecate a static method you must call ``deprecated_function``
632
(**not** method), after the staticmethod call::
635
@deprecated_function(zero_ninetyone)
636
def create_repository(base, shared=False, format=None):
638
When you deprecate an API, you should not just delete its tests, because
639
then we might introduce bugs in them. If the API is still present at all,
640
it should still work. The basic approach is to use
641
``TestCase.applyDeprecated`` which in one step checks that the API gives
642
the expected deprecation message, and also returns the real result from
643
the method, so that tests can keep running.
645
Coding Style Guidelines
646
=======================
651
Please write PEP-8__ compliant code.
653
__ http://www.python.org/peps/pep-0008.html
655
One often-missed requirement is that the first line of docstrings
656
should be a self-contained one-sentence summary.
658
We use 4 space indents for blocks, and never use tab characters. (In vim,
661
Lines should be no more than 79 characters if at all possible.
662
Lines that continue a long statement may be indented in either of
665
within the parenthesis or other character that opens the block, e.g.::
671
or indented by four spaces::
677
The first is considered clearer by some people; however it can be a bit
678
harder to maintain (e.g. when the method name changes), and it does not
679
work well if the relevant parenthesis is already far to the right. Avoid
682
self.legbone.kneebone.shinbone.toebone.shake_it(one,
688
self.legbone.kneebone.shinbone.toebone.shake_it(one,
694
self.legbone.kneebone.shinbone.toebone.shake_it(
697
For long lists, we like to add a trailing comma and put the closing
698
character on the following line. This makes it easier to add new items in
701
from bzrlib.goo import (
707
There should be spaces between function paramaters, but not between the
708
keyword name and the value::
710
call(1, 3, cheese=quark)
714
;(defface my-invalid-face
715
; '((t (:background "Red" :underline t)))
716
; "Face used to highlight invalid constructs or other uglyties"
719
(defun my-python-mode-hook ()
720
;; setup preferred indentation style.
721
(setq fill-column 79)
722
(setq indent-tabs-mode nil) ; no tabs, never, I will not repeat
723
; (font-lock-add-keywords 'python-mode
724
; '(("^\\s *\t" . 'my-invalid-face) ; Leading tabs
725
; ("[ \t]+$" . 'my-invalid-face) ; Trailing spaces
726
; ("^[ \t]+$" . 'my-invalid-face)); Spaces only
730
(add-hook 'python-mode-hook 'my-python-mode-hook)
732
The lines beginning with ';' are comments. They can be activated
733
if one want to have a strong notice of some tab/space usage
740
* Imports should be done at the top-level of the file, unless there is
741
a strong reason to have them lazily loaded when a particular
742
function runs. Import statements have a cost, so try to make sure
743
they don't run inside hot functions.
745
* Module names should always be given fully-qualified,
746
i.e. ``bzrlib.hashcache`` not just ``hashcache``.
752
Functions, methods or members that are "private" to bzrlib are given
753
a leading underscore prefix. Names without a leading underscore are
754
public not just across modules but to programmers using bzrlib as an
755
API. As a consequence, a leading underscore is appropriate for names
756
exposed across modules but that are not to be exposed to bzrlib API
759
We prefer class names to be concatenated capital words (``TestCase``)
760
and variables, methods and functions to be lowercase words joined by
761
underscores (``revision_id``, ``get_revision``).
763
For the purposes of naming some names are treated as single compound
764
words: "filename", "revno".
766
Consider naming classes as nouns and functions/methods as verbs.
768
Try to avoid using abbreviations in names, because there can be
769
inconsistency if other people use the full name.
775
``revision_id`` not ``rev_id`` or ``revid``
777
Functions that transform one thing to another should be named ``x_to_y``
778
(not ``x2y`` as occurs in some old code.)
784
Python destructors (``__del__``) work differently to those of other
785
languages. In particular, bear in mind that destructors may be called
786
immediately when the object apparently becomes unreferenced, or at some
787
later time, or possibly never at all. Therefore we have restrictions on
788
what can be done inside them.
790
0. Never use a __del__ method without asking Martin/Robert first.
792
1. Never rely on a ``__del__`` method running. If there is code that
793
must run, do it from a ``finally`` block instead.
795
2. Never ``import`` from inside a ``__del__`` method, or you may crash the
798
3. In some places we raise a warning from the destructor if the object
799
has not been cleaned up or closed. This is considered OK: the warning
800
may not catch every case but it's still useful sometimes.
806
In some places we have variables which point to callables that construct
807
new instances. That is to say, they can be used a lot like class objects,
808
but they shouldn't be *named* like classes:
810
> I think that things named FooBar should create instances of FooBar when
811
> called. Its plain confusing for them to do otherwise. When we have
812
> something that is going to be used as a class - that is, checked for via
813
> isinstance or other such idioms, them I would call it foo_class, so that
814
> it is clear that a callable is not sufficient. If it is only used as a
815
> factory, then yes, foo_factory is what I would use.
821
Several places in Bazaar use (or will use) a registry, which is a
822
mapping from names to objects or classes. The registry allows for
823
loading in registered code only when it's needed, and keeping
824
associated information such as a help string or description.
830
To make startup time faster, we use the ``bzrlib.lazy_import`` module to
831
delay importing modules until they are actually used. ``lazy_import`` uses
832
the same syntax as regular python imports. So to import a few modules in a
835
from bzrlib.lazy_import import lazy_import
836
lazy_import(globals(), """
845
revision as _mod_revision,
847
import bzrlib.transport
851
At this point, all of these exist as a ``ImportReplacer`` object, ready to
852
be imported once a member is accessed. Also, when importing a module into
853
the local namespace, which is likely to clash with variable names, it is
854
recommended to prefix it as ``_mod_<module>``. This makes it clearer that
855
the variable is a module, and these object should be hidden anyway, since
856
they shouldn't be imported into other namespaces.
859
Modules versus Members
860
~~~~~~~~~~~~~~~~~~~~~~
862
While it is possible for ``lazy_import()`` to import members of a module
863
when using the ``from module import member`` syntax, it is recommended to
864
only use that syntax to load sub modules ``from module import submodule``.
865
This is because variables and classes can frequently be used without
866
needing a sub-member for example::
868
lazy_import(globals(), """
869
from module import MyClass
873
return isinstance(x, MyClass)
875
This will incorrectly fail, because ``MyClass`` is a ``ImportReplacer``
876
object, rather than the real class.
879
Passing to Other Variables
880
~~~~~~~~~~~~~~~~~~~~~~~~~~
882
It also is incorrect to assign ``ImportReplacer`` objects to other variables.
883
Because the replacer only knows about the original name, it is unable to
884
replace other variables. The ``ImportReplacer`` class will raise an
885
``IllegalUseOfScopeReplacer`` exception if it can figure out that this
886
happened. But it requires accessing a member more than once from the new
887
variable, so some bugs are not detected right away.
893
The null revision is the ancestor of all revisions. Its revno is 0, its
894
revision-id is ``null:``, and its tree is the empty tree. When referring
895
to the null revision, please use ``bzrlib.revision.NULL_REVISION``. Old
896
code sometimes uses ``None`` for the null revision, but this practice is
903
Processing Command Lines
904
------------------------
906
bzrlib has a standard framework for parsing command lines and calling
907
processing routines associated with various commands. See builtins.py
908
for numerous examples.
911
Standard Parameter Types
912
------------------------
914
There are some common requirements in the library: some parameters need to be
915
unicode safe, some need byte strings, and so on. At the moment we have
916
only codified one specific pattern: Parameters that need to be unicode
917
should be checked via ``bzrlib.osutils.safe_unicode``. This will coerce the
918
input into unicode in a consistent fashion, allowing trivial strings to be
919
used for programmer convenience, but not performing unpredictably in the
920
presence of different locales.
926
(The strategy described here is what we want to get to, but it's not
927
consistently followed in the code at the moment.)
929
bzrlib is intended to be a generically reusable library. It shouldn't
930
write messages to stdout or stderr, because some programs that use it
931
might want to display that information through a GUI or some other
934
We can distinguish two types of output from the library:
936
1. Structured data representing the progress or result of an
937
operation. For example, for a commit command this will be a list
938
of the modified files and the finally committed revision number
941
These should be exposed either through the return code or by calls
942
to a callback parameter.
944
A special case of this is progress indicators for long-lived
945
operations, where the caller should pass a ProgressBar object.
947
2. Unstructured log/debug messages, mostly for the benefit of the
948
developers or users trying to debug problems. This should always
949
be sent through ``bzrlib.trace`` and Python ``logging``, so that
950
it can be redirected by the client.
952
The distinction between the two is a bit subjective, but in general if
953
there is any chance that a library would want to see something as
954
structured data, we should make it so.
956
The policy about how output is presented in the text-mode client
957
should be only in the command-line tool.
964
Bazaar has online help for various topics through ``bzr help COMMAND`` or
965
equivalently ``bzr command -h``. We also have help on command options,
966
and on other help topics. (See ``help_topics.py``.)
968
As for python docstrings, the first paragraph should be a single-sentence
969
synopsis of the command.
971
The help for options should be one or more proper sentences, starting with
972
a capital letter and finishing with a full stop (period).
974
All help messages and documentation should have two spaces between
981
In general tests should be placed in a file named test_FOO.py where
982
FOO is the logical thing under test. That file should be placed in the
983
tests subdirectory under the package being tested.
985
For example, tests for merge3 in bzrlib belong in bzrlib/tests/test_merge3.py.
986
See bzrlib/tests/test_sampler.py for a template test script.
988
Tests can be written for the UI or for individual areas of the library.
989
Choose whichever is appropriate: if adding a new command, or a new command
990
option, then you should be writing a UI test. If you are both adding UI
991
functionality and library functionality, you will want to write tests for
992
both the UI and the core behaviours. We call UI tests 'blackbox' tests
993
and they are found in ``bzrlib/tests/blackbox/*.py``.
995
When writing blackbox tests please honour the following conventions:
997
1. Place the tests for the command 'name' in
998
bzrlib/tests/blackbox/test_name.py. This makes it easy for developers
999
to locate the test script for a faulty command.
1001
2. Use the 'self.run_bzr("name")' utility function to invoke the command
1002
rather than running bzr in a subprocess or invoking the
1003
cmd_object.run() method directly. This is a lot faster than
1004
subprocesses and generates the same logging output as running it in a
1005
subprocess (which invoking the method directly does not).
1007
3. Only test the one command in a single test script. Use the bzrlib
1008
library when setting up tests and when evaluating the side-effects of
1009
the command. We do this so that the library api has continual pressure
1010
on it to be as functional as the command line in a simple manner, and
1011
to isolate knock-on effects throughout the blackbox test suite when a
1012
command changes its name or signature. Ideally only the tests for a
1013
given command are affected when a given command is changed.
1015
4. If you have a test which does actually require running bzr in a
1016
subprocess you can use ``run_bzr_subprocess``. By default the spawned
1017
process will not load plugins unless ``--allow-plugins`` is supplied.
1023
We have a rich collection of tools to support writing tests. Please use
1024
them in preference to ad-hoc solutions as they provide portability and
1025
performance benefits.
1030
The ``TreeBuilder`` interface allows the construction of arbitrary trees
1031
with a declarative interface. A sample session might look like::
1033
tree = self.make_branch_and_tree('path')
1034
builder = TreeBuilder()
1035
builder.start_tree(tree)
1036
builder.build(['foo', "bar/", "bar/file"])
1037
tree.commit('commit the tree')
1038
builder.finish_tree()
1040
Please see bzrlib.treebuilder for more details.
1045
The ``BranchBuilder`` interface allows the creation of test branches in a
1046
quick and easy manner. A sample session::
1048
builder = BranchBuilder(self.get_transport().clone('relpath'))
1049
builder.build_commit()
1050
builder.build_commit()
1051
builder.build_commit()
1052
branch = builder.get_branch()
1054
Please see bzrlib.branchbuilder for more details.
1059
We make selective use of doctests__. In general they should provide
1060
*examples* within the API documentation which can incidentally be tested. We
1061
don't try to test every important case using doctests -- regular Python
1062
tests are generally a better solution.
1064
Most of these are in ``bzrlib/doc/api``. More additions are welcome.
1066
__ http://docs.python.org/lib/module-doctest.html
1071
Currently, bzr selftest is used to invoke tests.
1072
You can provide a pattern argument to run a subset. For example,
1073
to run just the blackbox tests, run::
1075
./bzr selftest -v blackbox
1077
To skip a particular test (or set of tests), use the --exclude option
1078
(shorthand -x) like so::
1080
./bzr selftest -v -x blackbox
1082
To list tests without running them, use the --list-only option like so::
1084
./bzr selftest --list-only
1086
This option can be combined with other selftest options (like -x) and
1087
filter patterns to understand their effect.
1090
Handling Errors and Exceptions
1091
==============================
1093
Commands should return non-zero when they encounter circumstances that
1094
the user should really pay attention to - which includes trivial shell
1097
Recommended values are:
1100
1. Conflicts in merge-like operations, or changes are present in
1101
diff-like operations.
1102
2. Unrepresentable diff changes (i.e. binary files that we cannot show
1104
3. An error or exception has occurred.
1106
Errors are handled through Python exceptions. Exceptions should be defined
1107
inside bzrlib.errors, so that we can see the whole tree at a glance.
1109
We broadly classify errors as either being either internal or not,
1110
depending on whether ``internal_error`` is set or not. If we think it's our
1111
fault, we show a backtrace, an invitation to report the bug, and possibly
1112
other details. This is the default for errors that aren't specifically
1113
recognized as being caused by a user error. Otherwise we show a briefer
1114
message, unless -Derror was given.
1116
Many errors originate as "environmental errors" which are raised by Python
1117
or builtin libraries -- for example IOError. These are treated as being
1118
our fault, unless they're caught in a particular tight scope where we know
1119
that they indicate a user errors. For example if the repository format
1120
is not found, the user probably gave the wrong path or URL. But if one of
1121
the files inside the repository is not found, then it's our fault --
1122
either there's a bug in bzr, or something complicated has gone wrong in
1123
the environment that means one internal file was deleted.
1125
Many errors are defined in ``bzrlib/errors.py`` but it's OK for new errors
1126
to be added near the place where they are used.
1128
Exceptions are formatted for the user by conversion to a string
1129
(eventually calling their ``__str__`` method.) As a convenience the
1130
``._fmt`` member can be used as a template which will be mapped to the
1131
error's instance dict.
1133
New exception classes should be defined when callers might want to catch
1134
that exception specifically, or when it needs a substantially different
1137
Exception strings should start with a capital letter and should not have a
1138
final fullstop. If long, they may contain newlines to break the text.
1144
When you change bzrlib, please update the relevant documentation for the
1145
change you made: Changes to commands should update their help, and
1146
possibly end user tutorials; changes to the core library should be
1147
reflected in API documentation.
1152
If you make a user-visible change, please add a note to the NEWS file.
1153
The description should be written to make sense to someone who's just
1154
a user of bzr, not a developer: new functions or classes shouldn't be
1155
mentioned, but new commands, changes in behaviour or fixed nontrivial
1156
bugs should be listed. See the existing entries for an idea of what
1159
Within each release, entries in the news file should have the most
1160
user-visible changes first. So the order should be approximately:
1162
* changes to existing behaviour - the highest priority because the
1163
user's existing knowledge is incorrect
1164
* new features - should be brought to their attention
1165
* bug fixes - may be of interest if the bug was affecting them, and
1166
should include the bug number if any
1167
* major documentation changes
1168
* changes to internal interfaces
1170
People who made significant contributions to each change are listed in
1171
parenthesis. This can include reporting bugs (particularly with good
1172
details or reproduction recipes), submitting patches, etc.
1177
The docstring of a command is used by ``bzr help`` to generate help output
1178
for the command. The list 'takes_options' attribute on a command is used by
1179
``bzr help`` to document the options for the command - the command
1180
docstring does not need to document them. Finally, the '_see_also'
1181
attribute on a command can be used to reference other related help topics.
1186
Functions, methods, classes and modules should have docstrings
1187
describing how they are used.
1189
The first line of the docstring should be a self-contained sentence.
1191
For the special case of Command classes, this acts as the user-visible
1192
documentation shown by the help command.
1194
The docstrings should be formatted as reStructuredText_ (like this
1195
document), suitable for processing using the epydoc_ tool into HTML
1198
.. _reStructuredText: http://docutils.sourceforge.net/rst.html
1199
.. _epydoc: http://epydoc.sourceforge.net/
1208
The copyright policy for bzr was recently made clear in this email (edited
1209
for grammatical correctness)::
1211
The attached patch cleans up the copyright and license statements in
1212
the bzr source. It also adds tests to help us remember to add them
1213
with the correct text.
1215
We had the problem that lots of our files were "Copyright Canonical
1216
Development Ltd" which is not a real company, and some other variations
1217
on this theme. Also, some files were missing the GPL statements.
1219
I want to be clear about the intent of this patch, since copyright can
1220
be a little controversial.
1222
1) The big motivation for this is not to shut out the community, but
1223
just to clean up all of the invalid copyright statements.
1225
2) It has been the general policy for bzr that we want a single
1226
copyright holder for all of the core code. This is following the model
1227
set by the FSF, which makes it easier to update the code to a new
1228
license in case problems are encountered. (For example, if we want to
1229
upgrade the project universally to GPL v3 it is much simpler if there is
1230
a single copyright holder). It also makes it clearer if copyright is
1231
ever debated, there is a single holder, which makes it easier to defend
1232
in court, etc. (I think the FSF position is that if you assign them
1233
copyright, they can defend it in court rather than you needing to, and
1234
I'm sure Canonical would do the same).
1235
As such, Canonical has requested copyright assignments from all of the
1238
3) If someone wants to add code and not attribute it to Canonical, there
1239
is a specific list of files that are excluded from this check. And the
1240
test failure indicates where that is, and how to update it.
1242
4) If anyone feels that I changed a copyright statement incorrectly, just
1243
let me know, and I'll be happy to correct it. Whenever you have large
1244
mechanical changes like this, it is possible to make some mistakes.
1246
Just to reiterate, this is a community project, and it is meant to stay
1247
that way. Core bzr code is copyright Canonical for legal reasons, and
1248
the tests are just there to help us maintain that.
1251
Miscellaneous Topics
1252
####################
1257
Bazaar has a few facilities to help debug problems by going into pdb_, the
1260
.. _pdb: http://docs.python.org/lib/debugger-commands.html
1262
If the ``BZR_PDB`` environment variable is set
1263
then bzr will go into pdb post-mortem mode when an unhandled exception
1266
If you send a SIGQUIT signal to bzr, which can be done by pressing
1267
Ctrl-\\ on Unix, bzr will go into the debugger immediately. You can
1268
continue execution by typing ``c``. This can be disabled if necessary
1269
by setting the environment variable ``BZR_SIGQUIT_PDB=0``.
1276
Integer identifier for a revision on the main line of a branch.
1277
Revision 0 is always the null revision; others are 1-based
1278
indexes into the branch's revision history.
1281
Unicode and Encoding Support
1282
============================
1284
This section discusses various techniques that Bazaar uses to handle
1285
characters that are outside the ASCII set.
1290
When a ``Command`` object is created, it is given a member variable
1291
accessible by ``self.outf``. This is a file-like object, which is bound to
1292
``sys.stdout``, and should be used to write information to the screen,
1293
rather than directly writing to ``sys.stdout`` or calling ``print``.
1294
This file has the ability to translate Unicode objects into the correct
1295
representation, based on the console encoding. Also, the class attribute
1296
``encoding_type`` will effect how unprintable characters will be
1297
handled. This parameter can take one of 3 values:
1300
Unprintable characters will be represented with a suitable replacement
1301
marker (typically '?'), and no exception will be raised. This is for
1302
any command which generates text for the user to review, rather than
1303
for automated processing.
1304
For example: ``bzr log`` should not fail if one of the entries has text
1305
that cannot be displayed.
1308
Attempting to print an unprintable character will cause a UnicodeError.
1309
This is for commands that are intended more as scripting support, rather
1310
than plain user review.
1311
For exampl: ``bzr ls`` is designed to be used with shell scripting. One
1312
use would be ``bzr ls --null --unknows | xargs -0 rm``. If ``bzr``
1313
printed a filename with a '?', the wrong file could be deleted. (At the
1314
very least, the correct file would not be deleted). An error is used to
1315
indicate that the requested action could not be performed.
1318
Do not attempt to automatically convert Unicode strings. This is used
1319
for commands that must handle conversion themselves.
1320
For example: ``bzr diff`` needs to translate Unicode paths, but should
1321
not change the exact text of the contents of the files.
1324
``bzrlib.urlutils.unescape_for_display``
1325
----------------------------------------
1327
Because Transports work in URLs (as defined earlier), printing the raw URL
1328
to the user is usually less than optimal. Characters outside the standard
1329
set are printed as escapes, rather than the real character, and local
1330
paths would be printed as ``file://`` urls. The function
1331
``unescape_for_display`` attempts to unescape a URL, such that anything
1332
that cannot be printed in the current encoding stays an escaped URL, but
1333
valid characters are generated where possible.
1339
The ``bzrlib.osutils`` module has many useful helper functions, including
1340
some more portable variants of functions in the standard library.
1342
In particular, don't use ``shutil.rmtree`` unless it's acceptable for it
1343
to fail on Windows if some files are readonly or still open elsewhere.
1344
Use ``bzrlib.osutils.rmtree`` instead.
1350
We write some extensions in C using pyrex. We design these to work in
1353
* User with no C compiler
1354
* User with C compiler
1357
The recommended way to install bzr is to have a C compiler so that the
1358
extensions can be built, but if no C compiler is present, the pure python
1359
versions we supply will work, though more slowly.
1361
For developers we recommend that pyrex be installed, so that the C
1362
extensions can be changed if needed.
1364
For the C extensions, the extension module should always match the
1365
original python one in all respects (modulo speed). This should be
1366
maintained over time.
1368
To create an extension, add rules to setup.py for building it with pyrex,
1369
and with distutils. Now start with an empty .pyx file. At the top add
1370
"include 'yourmodule.py'". This will import the contents of foo.py into this
1371
file at build time - remember that only one module will be loaded at
1372
runtime. Now you can subclass classes, or replace functions, and only your
1373
changes need to be present in the .pyx file.
1375
Note that pyrex does not support all 2.4 programming idioms, so some
1376
syntax changes may be required. I.e.
1378
- 'from foo import (bar, gam)' needs to change to not use the brackets.
1379
- 'import foo.bar as bar' needs to be 'import foo.bar; bar = foo.bar'
1381
If the changes are too dramatic, consider
1382
maintaining the python code twice - once in the .pyx, and once in the .py,
1383
and no longer including the .py file.
1386
Making Installers for OS Windows
1387
================================
1388
To build a win32 installer, see the instructions on the wiki page:
1389
http://bazaar-vcs.org/BzrWin32Installer
1392
Core Developer Tasks
1393
####################
1398
What is a Core Developer?
1399
-------------------------
1401
While everyone in the Bazaar community is welcome and encouraged to
1402
propose and submit changes, a smaller team is reponsible for pulling those
1403
changes together into a cohesive whole. In addition to the general developer
1404
stuff covered above, "core" developers have responsibility for:
1407
* reviewing blueprints
1409
* managing releases.
1412
Removing barriers to community participation is a key reason for adopting
1413
distributed VCS technology. While DVCS removes many technical barriers,
1414
a small number of social barriers are often necessary instead.
1415
By documenting how the above things are done, we hope to
1416
encourage more people to participate in these activities, keeping the
1417
differences between core and non-core contributors to a minimum.
1420
The Development Lifecycle
1421
-------------------------
1423
As a rule, Bazaar development follows a 4 week cycle:
1425
* 2 weeks - general changes
1426
* 1 week - feature freeze
1427
* 1 week+ - Release Candidate stabilization
1429
During the FeatureFreeze week, the trunk (bzr.dev) is open in a limited
1430
way: only low risk changes, critical and high priority fixes are accepted
1431
during this time. At the end of FeatureFreeze, a branch is created for the
1432
first Release Candidate and the trunk is reopened for general development
1433
on the *next* release. A week or so later, the final release is packaged
1434
assuming no serious problems were encountered with the one or more Release
1438
There is a one week overlap between the start of one release and
1439
the end of the previous one.
1442
Communicating and Coordinating
1443
------------------------------
1445
While it has many advantages, one of the challenges of distributed
1446
development is keeping everyone else aware of what you're working on.
1447
There are numerous ways to do this:
1449
#. Assign bugs to yourself in Launchpad
1450
#. Mention it on the mailing list
1451
#. Mention it on IRC
1453
As well as the email notifcations that occur when merge requests are sent
1454
and reviewed, you can keep others informed of where you're spending your
1455
energy by emailing the **bazaar-commits** list implicitly. To do this,
1456
install and configure the Email plugin. One way to do this is add these
1457
configuration settings to your central configuration file (e.g.
1458
``~/.bazaar/bazaar.conf`` on Linux)::
1461
email = Joe Smith <joe.smith@internode.on.net>
1462
smtp_server = mail.internode.on.net:25
1464
Then add these lines for the relevant branches in ``locations.conf``::
1466
post_commit_to = bazaar-commits@lists.canonical.com
1467
post_commit_mailer = smtplib
1469
While attending a sprint, RobertCollins' Dbus plugin is useful for the
1470
same reason. See the documentation within the plugin for information on
1471
how to set it up and configure it.
1477
Setting Up Your Workspace for Reviews
1478
-------------------------------------
1480
TODO: Incorporate John Arbash Meinel's detailed email to Ian C on the
1481
numerous ways of setting up integration branches.
1484
The Review Checklist
1485
--------------------
1487
See `A Closer Look at the Merge & Review Process`_
1488
for information on the gates used to decide whether code can be merged
1489
or not and details on how review results are recorded and communicated.
1492
The Importance of Timely Reviews
1493
--------------------------------
1495
Good reviews do take time. They also regularly require a solid
1496
understanding of the overall code base. In practice, this means a small
1497
number of people often have a large review burden - with knowledge comes
1498
responsibility. No one like their merge requests sitting in a queue going
1499
nowhere, so reviewing sooner rather than later is strongly encouraged.
1508
Of the many workflows supported by Bazaar, the one adopted for Bazaar
1509
development itself is known as "Decentralized with automatic gatekeeper".
1510
To repeat the explanation of this given on
1511
http://bazaar-vcs.org/Workflows:
1514
In this workflow, each developer has their own branch or
1515
branches, plus read-only access to the mainline. A software gatekeeper
1516
(e.g. PQM) has commit rights to the main branch. When a developer wants
1517
their work merged, they request the gatekeeper to merge it. The gatekeeper
1518
does a merge, a compile, and runs the test suite. If the code passes, it
1519
is merged into the mainline.
1521
In a nutshell, here's the overall submission process:
1523
#. get your work ready (including review except for trivial changes)
1524
#. push to a public location
1525
#. ask PQM to merge from that location
1528
At present, PQM always takes the changes to merge from a branch
1529
at a URL that can be read by it. For Bazaar, that means a public,
1530
typically http, URL.
1532
As a result, the following things are needed to use PQM for submissions:
1534
#. A publicly available web server
1535
#. Your OpenPGP key registered with PQM (contact RobertCollins for this)
1536
#. The PQM plugin installed and configured (not strictly required but
1537
highly recommended).
1540
Selecting a Public Branch Location
1541
----------------------------------
1543
If you don't have your own web server running, branches can always be
1544
pushed to Launchpad. Here's the process for doing that:
1546
Depending on your location throughout the world and the size of your
1547
repository though, it is often quicker to use an alternative public
1548
location to Launchpad, particularly if you can set up your own repo and
1549
push into that. By using an existing repo, push only needs to send the
1550
changes, instead of the complete repository every time. Note that it is
1551
easy to register branches in other locations with Launchpad so no benefits
1552
are lost by going this way.
1555
For Canonical staff, http://people.ubuntu.com/~<user>/ is one
1556
suggestion for public http branches. Contact your manager for information
1557
on accessing this system if required.
1559
It should also be noted that best practice in this area is subject to
1560
change as things evolve. For example, once the Bazaar smart server on
1561
Launchpad supports server-side branching, the performance situation will
1562
be very different to what it is now (Jun 2007).
1565
Configuring the PQM Plug-In
1566
---------------------------
1568
While not strictly required, the PQM plugin automates a few things and
1569
reduces the chance of error. Before looking at the plugin, it helps to
1570
understand a little more how PQM operates. Basically, PQM requires an
1571
email indicating what you want it to do. The email typically looks like
1574
star-merge source-branch target-branch
1578
star-merge http://bzr.arbash-meinel.com/branches/bzr/jam-integration http://bazaar-vcs.org/bzr/bzr.dev
1580
Note that the command needs to be on one line. The subject of the email
1581
will be used for the commit message. The email also needs to be ``gpg``
1582
signed with a key that PQM accepts.
1584
The advantages of using the PQM plugin are:
1586
#. You can use the config policies to make it easy to set up public
1587
branches, so you don't have to ever type the full paths you want to merge
1590
#. It checks to make sure the public branch last revision matches the
1591
local last revision so you are submitting what you think you are.
1593
#. It uses the same public_branch and smtp sending settings as bzr-email,
1594
so if you have one set up, you have the other mostly set up.
1596
#. Thunderbird refuses to not wrap lines, and request lines are usually
1597
pretty long (you have 2 long URLs in there).
1599
Here are sample configuration settings for the PQM plugin. Here are the
1600
lines in bazaar.conf::
1603
email = Joe Smith <joe.smith@internode.on.net>
1604
smtp_server=mail.internode.on.net:25
1606
And here are the lines in ``locations.conf`` (or ``branch.conf`` for
1607
dirstate-tags branches)::
1609
[/home/joe/bzr/my-integration]
1610
push_location = sftp://joe-smith@bazaar.launchpad.net/%7Ejoe-smith/bzr/my-integration/
1611
push_location:policy = norecurse
1612
public_branch = http://bazaar.launchpad.net/~joe-smith/bzr/my-integration/
1613
public_branch:policy = appendpath
1614
pqm_email = Bazaar PQM <pqm@bazaar-vcs.org>
1615
pqm_branch = http://bazaar-vcs.org/bzr/bzr.dev
1617
Note that the push settings will be added by the first ``push`` on
1618
a branch. Indeed the preferred way to generate the lines above is to use
1619
``push`` with an argument, then copy-and-paste the other lines into
1626
Here is one possible recipe once the above environment is set up:
1628
#. pull bzr.dev => my-integration
1629
#. merge patch => my-integration
1630
#. fix up any final merge conflicts (NEWS being the big killer here).
1636
The ``push`` step is not required if ``my-integration`` is a checkout of
1639
Because of defaults, you can type a single message into commit and
1640
pqm-commit will reuse that.
1643
Tracking Change Acceptance
1644
--------------------------
1646
The web interface to PQM is https://pqm.bazaar-vcs.org/. After submitting
1647
a change, you can visit this URL to confirm it was received and placed in
1650
When PQM completes processing a change, an email is sent to you with the
1654
Reviewing Blueprints
1655
====================
1657
Blueprint Tracking Using Launchpad
1658
----------------------------------
1660
New features typically require a fair amount of discussion, design and
1661
debate. For Bazaar, that information is often captured in a so-called
1662
"blueprint" on our Wiki. Overall tracking of blueprints and their status
1663
is done using Launchpad's relevant tracker,
1664
https://blueprints.launchpad.net/bzr/. Once a blueprint for ready for
1665
review, please announce it on the mailing list.
1667
Alternatively, send an email begining with [RFC] with the proposal to the
1668
list. In some cases, you may wish to attach proposed code or a proposed
1669
developer document if that best communicates the idea. Debate can then
1670
proceed using the normal merge review processes.
1673
Recording Blueprint Review Feedback
1674
-----------------------------------
1676
Unlike its Bug Tracker, Launchpad's Blueprint Tracker doesn't currently
1677
(Jun 2007) support a chronological list of comment responses. Review
1678
feedback can either be recorded on the Wiki hosting the blueprints or by
1679
using Launchpad's whiteboard feature.
1688
As the two senior developers, Martin Pool and Robert Collins coordinate
1689
the overall Bazaar product development roadmap. Core developers provide
1690
input and review into this, particularly during sprints. It's totally
1691
expected that community members ought to be working on things that
1692
interest them the most. The roadmap is valuable though because it provides
1693
context for understanding where the product is going as a whole and why.
1696
Using Releases and Milestones in Launchpad
1697
------------------------------------------
1699
TODO ... (Exact policies still under discussion)
1705
Keeping on top of bugs reported is an important part of ongoing release
1706
planning. Everyone in the community is welcome and encouraged to raise
1707
bugs, confirm bugs raised by others, and nominate a priority. Practically
1708
though, a good percentage of bug triage is often done by the core
1709
developers, partially because of their depth of product knowledge.
1711
With respect to bug triage, core developers are encouraged to play an
1712
active role with particular attention to the following tasks:
1714
* keeping the number of unconfirmed bugs low
1715
* ensuring the priorities are generally right (everything as critical - or
1716
medium - is meaningless)
1717
* looking out for regressions and turning those around sooner rather than later.
1720
As well as prioritizing bugs and nominating them against a
1721
target milestone, Launchpad lets core developers offer to mentor others in
1731
TODO: Things to cover:
1733
* RFI on release objectives
1734
* RFI on higher risk things that are best done early, e.g. changes to file
1736
* Communication of proposed dates
1739
Weekly Status Updates
1740
---------------------
1742
TODO: Things to cover:
1744
* Early communication to downstream teams (e.g. Launchpad) about changes in dependencies.
1745
* Reminder re lifecycle and where we're up to right now
1746
* Summary of recent successes and pending work
1747
* Reminder re release objectives
1748
* Reminder re things needing attention, e.g. bug triage, reviews, testing of certain things, etc.
1754
TODO: Get material from http://bazaar-vcs.org/FeatureFreeze.
1760
TODO: Get material from http://bazaar-vcs.org/ReleaseChecklist and clean
1761
it up to make it clearer what the RC vs final vs both tasks are.
1767
TODO: Get material from http://bazaar-vcs.org/ReleaseChecklist and clean
1768
it up to make it clearer what the RC vs final vs both tasks are.
1771
vim: ft=rst tw=74 ai
added
removed
doc/developers/HACKING.txt
