2
=======================
7
While most configuration is handled by configuration files, some options
8
which may be semi-permanent can also be controlled through the environment.
13
Override the email id used by Bazaar. Typical format::
15
"John Doe <jdoe@example.com>"
17
See also the ``email`` configuration option.
22
Override the progress display. Possible values are "none" or "text". If
23
the value is "none" then no progress bar is displayed. The value "text" draws
24
the ordinary command line progress bar.
29
Control whether SIGQUIT behaves normally or invokes a breakin debugger.
31
* 0 = Standard SIGQUIT behavior (normally, exit with a core dump)
32
* 1 = Invoke breakin debugger (default)
37
Override the home directory used by Bazaar.
42
Select a different SSH implementation.
47
Control whether to launch a debugger on error.
49
* 0 = Standard behavior
55
Path to the Bazaar executable to use when using the bzr+ssh protocol.
57
See also the ``bzr_remote_path`` configuration option.
62
Path to the editor Bazaar should use for commit messages, etc.
67
Location of the Bazaar log file. You can check the current location by
68
running ``bzr version``.
70
The log file contains debug information that is useful for diagnosing or
71
reporting problems with Bazaar.
73
Setting this to ``NUL`` on Windows or ``/dev/null`` on other platforms
80
The path to the plugins directory that Bazaar should use.
81
If not set, Bazaar will search for plugins in:
83
* the user specific plugin directory (containing the ``user`` plugins),
85
* the bzrlib directory (containing the ``core`` plugins),
87
* the site specific plugin directory if applicable (containing
88
the ``site`` plugins).
90
If ``BZR_PLUGIN_PATH`` is set in any fashion, it will change the
91
the way the plugin are searched.
93
As for the ``PATH`` variables, if multiple directories are
94
specified in ``BZR_PLUGIN_PATH`` they should be separated by the
95
platform specific appropriate character (':' on Unix,
98
By default if ``BZR_PLUGIN_PATH`` is set, it replaces searching
99
in ``user``. However it will continue to search in ``core`` and
100
``site`` unless they are explicitly removed.
102
If you need to change the order or remove one of these
103
directories, you should use special values:
105
* ``-user``, ``-core``, ``-site`` will remove the corresponding
106
path from the default values,
108
* ``+user``, ``+core``, ``+site`` will add the corresponding path
109
before the remaining default values (and also remove it from
112
Note that the special values 'user', 'core' and 'site' should be
113
used literally, they will be substituted by the corresponding,
114
platform specific, values.
116
The examples below use ':' as the separator, windows users
119
Overriding the default user plugin directory::
121
BZR_PLUGIN_PATH='/path/to/my/other/plugins'
123
Disabling the site directory while retaining the user directory::
125
BZR_PLUGIN_PATH='-site:+user'
127
Disabling all plugins (better achieved with --no-plugins)::
129
BZR_PLUGIN_PATH='-user:-core:-site'
131
Overriding the default site plugin directory::
133
BZR_PLUGIN_PATH='/path/to/my/site/plugins:-site':+user
138
Under special circumstances (mostly when trying to diagnose a
139
bug), it's better to disable a plugin (or several) rather than
140
uninstalling them completely. Such plugins can be specified in
141
the ``BZR_DISABLE_PLUGINS`` environment variable.
143
In that case, ``bzr`` will stop loading the specified plugins and
144
will raise an import error if they are explicitly imported (by
145
another plugin that depends on them for example).
147
Disabling ``myplugin`` and ``yourplugin`` is achieved by::
149
BZR_DISABLE_PLUGINS='myplugin:yourplugin'
154
When adding a new feature or working on a bug in a plugin,
155
developers often need to use a specific version of a given
156
plugin. Since python requires that the directory containing the
157
code is named like the plugin itself this make it impossible to
158
use arbitrary directory names (using a two-level directory scheme
159
is inconvenient). ``BZR_PLUGINS_AT`` allows such directories even
160
if they don't appear in ``BZR_PLUGIN_PATH`` .
162
Plugins specified in this environment variable takes precedence
163
over the ones in ``BZR_PLUGIN_PATH``.
165
The variable specified a list of ``plugin_name@plugin path``,
166
``plugin_name`` being the name of the plugin as it appears in
167
python module paths, ``plugin_path`` being the path to the
168
directory containing the plugin code itself
169
(i.e. ``plugins/myplugin`` not ``plugins``). Use ':' as the list
170
separator, use ';' on windows.
175
Using a specific version of ``myplugin``:
176
``BZR_PLUGINS_AT='myplugin@/home/me/bugfixes/123456-myplugin``
181
The path where Bazaar should look for shell plugin external commands.
184
http_proxy, https_proxy
185
~~~~~~~~~~~~~~~~~~~~~~~
187
Specifies the network proxy for outgoing connections, for example::
189
http_proxy=http://proxy.example.com:3128/
190
https_proxy=http://proxy.example.com:3128/
199
Configuration files are located in ``$HOME/.bazaar`` on Unix and
200
``C:\Documents and Settings\<username>\Application Data\Bazaar\2.0`` on
201
Windows. (You can check the location for your system by using
204
There are three primary configuration files in this location:
206
* ``bazaar.conf`` describes default configuration options,
208
* ``locations.conf`` describes configuration information for
209
specific branch locations,
211
* ``authentication.conf`` describes credential information for
214
Each branch can also contain a configuration file that sets values specific
215
to that branch. This file is found at ``.bzr/branch/branch.conf`` within the
216
branch. This file is visible to all users of a branch, if you wish to override
217
one of the values for a branch with a setting that is specific to you then you
218
can do so in ``locations.conf``.
223
An ini file has three types of contructs: section headers, section
224
options and comments.
229
A comment is any line that starts with a "#" (sometimes called a "hash
230
mark", "pound sign" or "number sign"). Comment lines are ignored by
231
Bazaar when parsing ini files.
236
A section header is a word enclosed in brackets that starts at the begining
237
of a line. A typical section header looks like this::
241
The only valid section headers for bazaar.conf currently are [DEFAULT] and
242
[ALIASES]. Section headers are case sensitive. The default section provides for
243
setting options which can be overridden with the branch config file.
245
For ``locations.conf``, the options from the section with the
246
longest matching section header are used to the exclusion of other
247
potentially valid section headers. A section header uses the path for
248
the branch as the section header. Some examples include::
250
[http://mybranches.isp.com/~jdoe/branchdir]
251
[/home/jdoe/branches/]
257
A section option resides within a section. A section option contains an
258
option name, an equals sign and a value. For example::
260
email = John Doe <jdoe@isp.com>
261
gpg_signing_key = Amy Pond <amy@example.com>
263
A option can reference other options by enclosing them in curly brackets::
265
my_branch_name = feature_x
266
my_server = bzr+ssh://example.com
267
push_location = {my_server}/project/{my_branch_name}
272
Options defined in a section affect the named directory or URL plus
273
any locations they contain. Policies can be used to change how an
274
option value is interpreted for contained locations. Currently
275
there are three policies available:
278
the value is interpreted the same for contained locations. This is
279
the default behaviour.
281
the value is only used for the exact location specified by the
284
for contained locations, any additional path components are
285
appended to the value.
287
Policies are specified by keys with names of the form "<option_name>:policy".
288
For example, to define the push location for a tree of branches, the
289
following could be used::
292
push_location = sftp://example.com/location
293
push_location:policy = appendpath
295
With this configuration, the push location for ``/top/location/branch1``
296
would be ``sftp://example.com/location/branch1``.
298
Section local options
299
^^^^^^^^^^^^^^^^^^^^^
301
Some options are defined automatically inside a given section and can be
302
refered to in this section only.
304
For example, the ``appendpath`` policy can be used like this::
306
[/home/vila/src/bzr/bugs]
307
mypush = lp:~vila/bzr
308
mypush:policy=appendpath
310
Using ``relpath`` to achieve the same result is done like this::
312
[/home/vila/src/bzr/bugs]
313
mypush = lp:~vila/bzr/{relpath}
315
In both cases, when used in a directory like
316
``/home/vila/src/bzr/bugs/832013-expand-in-stack`` we'll get::
319
lp:~vila/bzr/832013-expand-in-stack
321
When an option is local to a Section, it cannot be referred to from option
322
values in any other section from the same ``Store`` nor from any other
326
The main configuration file, bazaar.conf
327
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
329
``bazaar.conf`` allows two sections: ``[DEFAULT]`` and ``[ALIASES]``.
330
The default section contains the default
331
configuration options for all branches. The default section can be
332
overriden by providing a branch-specific section in ``locations.conf``.
334
A typical ``bazaar.conf`` section often looks like the following::
337
email = John Doe <jdoe@isp.com>
338
editor = /usr/bin/vim
339
create_signatures = when-required
342
The branch location configuration file, locations.conf
343
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
345
``locations.conf`` allows one to specify overriding settings for
346
a specific branch. The format is almost identical to the default section in
347
bazaar.conf with one significant change: The section header, instead of saying
348
default, will be the path to a branch that you wish to override a value
349
for. The '?' and '*' wildcards are supported::
351
[/home/jdoe/branches/nethack]
352
email = Nethack Admin <nethack@nethack.com>
354
[http://hypothetical.site.com/branches/devel-branch]
355
create_signatures = always
357
The authentication configuration file, authentication.conf
358
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
360
``authentication.conf`` allows one to specify credentials for
361
remote servers. This can be used for all the supported transports and any part
362
of bzr that requires authentication (smtp for example).
364
The syntax of the file obeys the same rules as the others except for the
365
option policies which don't apply.
367
For more information on the possible uses of the authentication configuration
368
file see :doc:`authentication-help`.
377
A comma-separated list of debugging options to turn on. The same values
378
can be used as with the -D command-line option (see `help global-options`).
385
debug_flags = hpss,evil
390
The email address to use when committing a branch. Typically takes the form
393
email = Full Name <account@hostname.tld>
398
The path of the editor that you wish to use if *bzr commit* is run without
399
a commit message. This setting is trumped by the environment variable
400
``BZR_EDITOR``, and overrides the ``VISUAL`` and ``EDITOR`` environment
406
The default log format to use. Standard log formats are ``long``, ``short``
407
and ``line``. Additional formats may be provided by plugins. The default
413
Reserved for future use. These options will allow a policy for branches to
417
The gnupg signature for revisions must be present and must be valid.
420
Do not check gnupg signatures of revisions.
423
(default) If gnupg signatures for revisions are present, check them.
424
Bazaar will fail if it finds a bad signature, but will not fail if
425
no signature is present.
430
Defines the behaviour of signing revisions on commits. By default bzr will not
434
Sign every new revision that is committed. If the signing fails then the
435
commit will not be made.
438
Reserved for future use.
441
Reserved for future use.
443
In future it is planned that ``when-required`` will sign newly
444
committed revisions only when the branch requires them. ``never`` will refuse
445
to sign newly committed revisions, even if the branch requires signatures.
450
If true (default), working tree metadata changes are flushed through the
451
OS buffers to physical disk. This is somewhat slower, but means data
452
should not be lost if the machine crashes. See also repository.fdatasync.
457
The GnuPG user identity to use when signing commits. Can be an e-mail
458
address, key fingerprint or full key ID. When unset or when set to
459
"default" Bazaar will use the user e-mail set with ``whoami``.
464
Only useful in ``locations.conf``. Defines whether or not the
465
configuration for this section applies to subdirectories:
468
(default) This section applies to subdirectories as well.
471
This section only applies to the branch at this directory and not
477
(Default: "gpg"). Which program should be used to sign and check revisions.
480
gpg_signing_command = /usr/bin/gnpg
482
The specified command must accept the options "--clearsign" and "-u <email>".
487
(Default: "bzr"). The path to the command that should be used to run the smart
488
server for bzr. This value may only be specified in locations.conf, because:
490
- it's needed before branch.conf is accessible
491
- allowing remote branch.conf files to specify commands would be a security
494
It is overridden by the BZR_REMOTE_PATH environment variable.
499
(Default: "localhost"). SMTP server to use when Bazaar needs to send
500
email, eg. with ``merge-directive --mail-to``, or the bzr-email plugin.
502
smtp_username, smtp_password
503
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
505
User and password to authenticate to the SMTP server. If smtp_username
506
is set, and smtp_password is not, Bazaar will prompt for a password.
507
These settings are only needed if the SMTP server requires authentication
513
If set to true, bzr will automatically break locks held by processes from
514
the same machine and user that are no longer alive. Otherwise, it will
515
print a message and you can break the lock manually, if you are satisfied
516
the object is no longer in use.
521
A mail client to use for sending merge requests.
522
By default, bzr will try to use ``mapi`` on Windows. On other platforms, it
523
will try ``xdg-email``. If either of these fails, it will fall back to
526
Supported values for specific clients:
528
:claws: Use Claws. This skips a dialog for attaching files.
529
:evolution: Use Evolution.
532
:thunderbird: Use Mozilla Thunderbird or Icedove. For Thunderbird/Icedove 1.5,
533
this works around some bugs that xdg-email doesn't handle.
535
Supported generic values are:
538
:editor: Use your editor to compose the merge request. This also uses
539
your commit id, (see ``bzr whoami``), smtp_server and (optionally)
540
smtp_username and smtp_password.
541
:mapi: Use your preferred e-mail client on Windows.
542
:xdg-email: Use xdg-email to run your preferred mail program
547
If true (default), repository changes are flushed through the OS buffers
548
to physical disk. This is somewhat slower, but means data should not be
549
lost if the machine crashes. See also dirstate.fdatasync.
554
The branch you intend to submit your current work to. This is automatically
555
set by ``bzr send``, and is also used by the ``submit:`` revision spec. This
556
should usually be set on a per-branch or per-location basis.
561
A publically-accessible version of this branch (implying that this version is
562
not publically-accessible). Used (and set) by ``bzr send``.
567
A list of strings, each string represent a warning that can be emitted by
568
bzr. Mentioning a warning in this list tells bzr to not emit it.
572
* ``format_deprecation``:
573
whether the format deprecation warning is shown on repositories that are
574
using deprecated formats.
579
A format name for the default format used when creating branches. See ``bzr
580
help formats`` for possible values.
589
A Python unicode encoding name for text output from bzr, such as log
590
information. Values include: utf8, cp850, ascii, iso-8859-1. The default
591
is the terminal encoding prefered by the operating system.
594
Branch type specific options
595
----------------------------
597
These options apply only to branches that use the ``dirstate-tags`` or
599
are usually set in ``.bzr/branch/branch.conf`` automatically, but may be
600
manually set in ``locations.conf`` or ``bazaar.conf``.
602
append_revisions_only
603
~~~~~~~~~~~~~~~~~~~~~
605
If set to "True" then revisions can only be appended to the log, not
606
removed. A branch with this setting enabled can only pull from another
607
branch if the other branch's log is a longer version of its own. This is
608
normally set by ``bzr init --append-revisions-only``. If you set it
609
manually, use either 'True' or 'False' (case-sensitive) to maintain
610
compatibility with previous bzr versions (older than 2.2).
615
If present, the location of the default branch for pull or merge. This option
616
is normally set when creating a branch, the first ``pull`` or by ``pull
622
If present, the location of the default branch for push. This option
623
is normally set by the first ``push`` or ``push --remember``.
628
If present, defines the ``--strict`` option default value for checking
629
uncommitted changes before pushing.
634
If present, defines the ``--strict`` option default value for checking
635
uncommitted changes before pushing into a different VCS without any
641
The location that commits should go to when acting as a checkout.
642
This option is normally set by ``bind``.
647
If set to "True", the branch should act as a checkout, and push each commit to
648
the bound_location. This option is normally set by ``bind``/``unbind``.
653
If present, defines the ``--strict`` option default value for checking
654
uncommitted changes before sending a merge directive.
656
add.maximum_file_size
657
~~~~~~~~~~~~~~~~~~~~~
659
Defines the maximum file size the command line "add" operation will allow
660
in recursive mode, with files larger than this value being skipped. You may
661
specify this value as an integer (in which case it is interpreted as bytes),
662
or you may specify the value using SI units, i.e. 10KB, 20MB, 1G. A value of 0
663
will disable skipping.
671
Defines an external merge tool called <name> with the given command-line.
672
Arguments containing spaces should be quoted using single or double quotes. The
673
executable may omit its path if it can be found on the PATH.
675
The following markers can be used in the command-line to substitute filenames
676
involved in the merge conflict::
682
{this_temp} temp copy of file.THIS, used to overwrite output file if merge
687
bzr.mergetool.kdiff3 = kdiff3 {base} {this} {other} -o {result}
689
bzr.default_mergetool
690
~~~~~~~~~~~~~~~~~~~~~
692
Specifies which external merge tool (as defined above) should be selected by
693
default in tools such as ``bzr qconflicts``.
697
bzr.default_mergetool = kdiff3
added
removed
bzrlib/help_topics/en/configuration.txt
