1
***********************
2
Bazaar Code Style Guide
3
***********************
8
Please write PEP-8__ compliant code.
10
__ http://www.python.org/peps/pep-0008.html
12
One often-missed requirement is that the first line of docstrings
13
should be a self-contained one-sentence summary.
15
We use 4 space indents for blocks, and never use tab characters. (In vim,
18
Trailing white space should be avoided, but is allowed.
19
You should however not make lots of unrelated white space changes.
21
Unix style newlines (LF) are used.
23
Each file must have a newline at the end of it.
25
Lines should be no more than 79 characters if at all possible.
26
Lines that continue a long statement may be indented in either of
29
within the parenthesis or other character that opens the block, e.g.::
35
or indented by four spaces::
41
The first is considered clearer by some people; however it can be a bit
42
harder to maintain (e.g. when the method name changes), and it does not
43
work well if the relevant parenthesis is already far to the right. Avoid
46
self.legbone.kneebone.shinbone.toebone.shake_it(one,
52
self.legbone.kneebone.shinbone.toebone.shake_it(one,
58
self.legbone.kneebone.shinbone.toebone.shake_it(
61
For long lists, we like to add a trailing comma and put the closing
62
character on the following line. This makes it easier to add new items in
65
from bzrlib.goo import (
71
There should be spaces between function parameters, but not between the
72
keyword name and the value::
74
call(1, 3, cheese=quark)
80
Bazaar supports Python from 2.4 through 2.6, and in the future we want to
81
support Python 2.7 and 3.0. Avoid using language features added in 2.5,
82
2.6 or 2.7, or features deprecated in Python 3.0. (You can check v3
83
compatibility using the ``-3`` option of Python2.6.)
87
* Don't use the ``with`` statement.
89
* Don't ``from . import``.
91
* Don't use ``try/except/finally``, which is not supported in Python2.4,
92
use separate nested ``try/except`` and ``try/finally`` blocks.
98
``hasattr`` should not be used because it swallows exceptions including
99
``KeyboardInterrupt``. Instead, say something like ::
101
if getattr(thing, 'name', None) is None
107
``**kwargs`` in the prototype of a function should be used sparingly.
108
It can be good on higher-order functions that decorate other functions,
109
such as ``addCleanup`` or ``assertRaises``, or on functions that take only
110
(or almost only) kwargs, where any kwargs can be passed.
112
Otherwise, be careful: if the parameters to a function are a bit complex
113
and might vary over time (e.g. the ``commit`` API) then we prefer to pass an
114
object rather than a bag of positional and/or keyword args. If you have
115
an arbitrary set of keys and values that are different with each use (e.g.
116
string interpolation inputs) then again that should not be mixed in with
117
the regular positional/keyword args, it seems like a different category of
121
Imitating standard objects
122
==========================
124
Don't provide methods that imitate built-in classes (eg ``__in__``,
125
``__call__``, ``__int__``, ``__getitem__``) unless the class you're
126
implementing really does act like the builtin class, in semantics and
129
For example, old code lets you say ``file_id in inv`` but we no longer
130
consider this good style. Instead, say more explicitly
131
``inv.has_id(file_id)``.
133
``__repr__``, ``__cmp__``, ``__str__`` are usually fine.
139
* Imports should be done at the top-level of the file, unless there is
140
a strong reason to have them lazily loaded when a particular
141
function runs. Import statements have a cost, so try to make sure
142
they don't run inside hot functions.
144
* Module names should always be given fully-qualified,
145
i.e. ``bzrlib.hashcache`` not just ``hashcache``.
151
Functions, methods or members that are relatively private are given
152
a leading underscore prefix. Names without a leading underscore are
153
public not just across modules but to programmers using bzrlib as an
156
We prefer class names to be concatenated capital words (``TestCase``)
157
and variables, methods and functions to be lowercase words joined by
158
underscores (``revision_id``, ``get_revision``).
160
For the purposes of naming some names are treated as single compound
161
words: "filename", "revno".
163
Consider naming classes as nouns and functions/methods as verbs.
165
Try to avoid using abbreviations in names, because there can be
166
inconsistency if other people use the full name.
172
``revision_id`` not ``rev_id`` or ``revid``
174
Functions that transform one thing to another should be named ``x_to_y``
175
(not ``x2y`` as occurs in some old code.)
181
Python destructors (``__del__``) work differently to those of other
182
languages. In particular, bear in mind that destructors may be called
183
immediately when the object apparently becomes unreferenced, or at some
184
later time, or possibly never at all. Therefore we have restrictions on
185
what can be done inside them.
187
0. If you think you need to use a ``__del__`` method ask another
188
developer for alternatives. If you do need to use one, explain
191
1. Never rely on a ``__del__`` method running. If there is code that
192
must run, do it from a ``finally`` block instead.
194
2. Never ``import`` from inside a ``__del__`` method, or you may crash the
197
3. In some places we raise a warning from the destructor if the object
198
has not been cleaned up or closed. This is considered OK: the warning
199
may not catch every case but it's still useful sometimes.
205
Often when something has failed later code will fail too, including
206
cleanups invoked from ``finally`` blocks. These secondary failures are
207
generally uninteresting compared to the original exception. ``bzrlib``
208
has some facilities you can use to mitigate this.
210
* In ``Command`` subclasses, prefer the ``add_cleanup`` method to using
211
``try``/``finally`` blocks. E.g. to acquire a lock and ensure it will
212
always be released when the command is done::
214
self.add_cleanup(branch.lock_read().unlock)
216
This also avoids heavily indented code. It also makes it easier to notice
217
mismatched lock/unlock pairs (and other kinds of resource
218
acquire/release) because there isn't a large block of code separating
221
* Use the ``only_raises`` decorator (from ``bzrlib.decorators``) when
222
defining methods that are typically called in ``finally`` blocks, such
223
as ``unlock`` methods. For example, ``@only_raises(LockNotHeld,
224
LockBroken)``. All errors that are unlikely to be a knock-on failure
225
from a previous failure should be allowed.
227
* Consider using the ``OperationWithCleanups`` helper from
228
``bzrlib.cleanup`` anywhere else you have a ``finally`` block that
235
In some places we have variables which point to callables that construct
236
new instances. That is to say, they can be used a lot like class objects,
237
but they shouldn't be *named* like classes. Things called ``FooBar`` should
238
create an instance of ``FooBar``. A factory method that might create a
239
``FooBar`` or might make something else should be called ``foo_factory``.
245
Several places in Bazaar use (or will use) a registry, which is a
246
mapping from names to objects or classes. The registry allows for
247
loading in registered code only when it's needed, and keeping
248
associated information such as a help string or description.
251
InterObject and multiple dispatch
252
=================================
254
The ``InterObject`` provides for two-way `multiple dispatch`__: matching
255
up for example a source and destination repository to find the right way
256
to transfer data between them.
258
.. __: http://en.wikipedia.org/wiki/Multiple_dispatch
260
There is a subclass ``InterObject`` classes for each type of object that is
261
dispatched this way, e.g. ``InterRepository``. Calling ``.get()`` on this
262
class will return an ``InterObject`` instance providing the best match for
263
those parameters, and this instance then has methods for operations
268
inter = InterRepository.get(source_repo, target_repo)
269
inter.fetch(revision_id)
271
``InterRepository`` also acts as a registry-like object for its
272
subclasses, and they can be added through ``.register_optimizer``. The
273
right one to run is selected by asking each class, in reverse order of
274
registration, whether it ``.is_compatible`` with the relevant objects.
279
To make startup time faster, we use the ``bzrlib.lazy_import`` module to
280
delay importing modules until they are actually used. ``lazy_import`` uses
281
the same syntax as regular python imports. So to import a few modules in a
284
from bzrlib.lazy_import import lazy_import
285
lazy_import(globals(), """
294
revision as _mod_revision,
296
import bzrlib.transport
300
At this point, all of these exist as a ``ImportReplacer`` object, ready to
301
be imported once a member is accessed. Also, when importing a module into
302
the local namespace, which is likely to clash with variable names, it is
303
recommended to prefix it as ``_mod_<module>``. This makes it clearer that
304
the variable is a module, and these object should be hidden anyway, since
305
they shouldn't be imported into other namespaces.
307
While it is possible for ``lazy_import()`` to import members of a module
308
when using the ``from module import member`` syntax, it is recommended to
309
only use that syntax to load sub modules ``from module import submodule``.
310
This is because variables and classes can frequently be used without
311
needing a sub-member for example::
313
lazy_import(globals(), """
314
from module import MyClass
318
return isinstance(x, MyClass)
320
This will incorrectly fail, because ``MyClass`` is a ``ImportReplacer``
321
object, rather than the real class.
323
It also is incorrect to assign ``ImportReplacer`` objects to other variables.
324
Because the replacer only knows about the original name, it is unable to
325
replace other variables. The ``ImportReplacer`` class will raise an
326
``IllegalUseOfScopeReplacer`` exception if it can figure out that this
327
happened. But it requires accessing a member more than once from the new
328
variable, so some bugs are not detected right away.
334
The null revision is the ancestor of all revisions. Its revno is 0, its
335
revision-id is ``null:``, and its tree is the empty tree. When referring
336
to the null revision, please use ``bzrlib.revision.NULL_REVISION``. Old
337
code sometimes uses ``None`` for the null revision, but this practice is
341
Object string representations
342
=============================
344
Python prints objects using their ``__repr__`` method when they are
345
written to logs, exception tracebacks, or the debugger. We want
346
objects to have useful representations to help in determining what went
349
If you add a new class you should generally add a ``__repr__`` method
350
unless there is an adequate method in a parent class. There should be a
353
Representations should typically look like Python constructor syntax, but
354
they don't need to include every value in the object and they don't need
355
to be able to actually execute. They're to be read by humans, not
356
machines. Don't hardcode the classname in the format, so that we get the
357
correct value if the method is inherited by a subclass. If you're
358
printing attributes of the object, including strings, you should normally
359
use ``%r`` syntax (to call their repr in turn).
361
Try to avoid the representation becoming more than one or two lines long.
362
(But balance this against including useful information, and simplicity of
365
Because repr methods are often called when something has already gone
366
wrong, they should be written somewhat more defensively than most code.
367
The object may be half-initialized or in some other way in an illegal
368
state. The repr method shouldn't raise an exception, or it may hide the
369
(probably more useful) underlying exception.
374
return '%s(%r)' % (self.__class__.__name__,
381
A bare ``except`` statement will catch all exceptions, including ones that
382
really should terminate the program such as ``MemoryError`` and
383
``KeyboardInterrupt``. They should rarely be used unless the exception is
384
later re-raised. Even then, think about whether catching just
385
``Exception`` (which excludes system errors in Python2.5 and later) would
392
All code should be exercised by the test suite. See the `Bazaar Testing
393
Guide <http://doc.bazaar.canonical.com/developers/testing.html>`_ for detailed
394
information about writing tests.
400
Do not use the Python ``assert`` statement, either in tests or elsewhere.
401
A source test checks that it is not used. It is ok to explicitly raise
406
* It makes the behaviour vary depending on whether bzr is run with -O
407
or not, therefore giving a chance for bugs that occur in one case or
408
the other, several of which have already occurred: assertions with
409
side effects, code which can't continue unless the assertion passes,
410
cases where we should give the user a proper message rather than an
412
* It's not that much shorter than an explicit if/raise.
413
* It tends to lead to fuzzy thinking about whether the check is
414
actually needed or not, and whether it's an internal error or not
415
* It tends to cause look-before-you-leap patterns.
416
* It's unsafe if the check is needed to protect the integrity of the
418
* It tends to give poor messages since the developer can get by with
419
no explanatory text at all.
420
* We can't rely on people always running with -O in normal use, so we
421
can't use it for tests that are actually expensive.
422
* Expensive checks that help developers are better turned on from the
423
test suite or a -D flag.
424
* If used instead of ``self.assert*()`` in tests it makes them falsely
432
;(defface my-invalid-face
433
; '((t (:background "Red" :underline t)))
434
; "Face used to highlight invalid constructs or other uglyties"
437
(defun my-python-mode-hook ()
438
;; setup preferred indentation style.
439
(setq fill-column 79)
440
(setq indent-tabs-mode nil) ; no tabs, never, I will not repeat
441
; (font-lock-add-keywords 'python-mode
442
; '(("^\\s *\t" . 'my-invalid-face) ; Leading tabs
443
; ("[ \t]+$" . 'my-invalid-face) ; Trailing spaces
444
; ("^[ \t]+$" . 'my-invalid-face)); Spaces only
448
(add-hook 'python-mode-hook 'my-python-mode-hook)
450
The lines beginning with ';' are comments. They can be activated
451
if one want to have a strong notice of some tab/space usage
457
The ``bzrlib.osutils`` module has many useful helper functions, including
458
some more portable variants of functions in the standard library.
460
In particular, don't use ``shutil.rmtree`` unless it's acceptable for it
461
to fail on Windows if some files are readonly or still open elsewhere.
462
Use ``bzrlib.osutils.rmtree`` instead.
464
Using the ``open(..).read(..)`` or ``open(..).write(..)`` style chaining
465
of methods for reading or writing file content relies on garbage collection
466
to close the file which may keep the file open for an undefined period of
467
time. This may break some follow up operations like rename on Windows.
468
Use ``try/finally`` to explictly close the file. E.g.::
470
f = open('foo.txt', 'w')
480
Bazaar is a GNU project and uses standard GNU terminology, especially:
482
* Use the word "Linux" to refer to the Linux kernel, not as a synechoche
483
for the entire operating system. (See `bug 528253
484
<https://bugs.launchpad.net/bzr/+bug/528253>`_).
486
* Don't say "open source" when you mean "free software".
added
removed
doc/developers/code-style.txt
