1
bzr-0.0.5 NOT RELEASED YET
5
* Tests updates to ensure proper URL handling, UNICODE support, and
6
proper printing when the user's terminal encoding cannot display
7
the path of a file that has been versioned.
8
``bzr branch`` can take a target URL rather than only a local directory.
9
Branch.get_parent()/set_parent() now save a relative path if possible,
10
and normalize the parent based on root, allowing access across
11
different transports. (John Arbash Meinel, Wouter van Heyst, Martin Pool)
12
(Malone #48906, #42699, #40675, #5281, #3980, #36363, #43689,
15
* On Unix, detect terminal width using an ioctl not just $COLUMNS.
16
Use terminal width for single-line logs from ``bzr log --line`` and
17
pending-merge display. (Robert Widhopf-Fenk, Gustavo Niemeyer)
20
* On Windows, detect terminal width using GetConsoleScreenBufferInfo.
23
* Speedup improvement for 'date:'-revision search. (Guillaume Pinot).
25
* Show the correct number of revisions pushed when pushing a new branch.
28
* 'bzr selftest' now shows a progress bar with the number of tests, and
29
progress made. 'make check' shows tests in -v mode, to be more useful
30
for the PQM status window. (Robert Collins).
32
* 'bzr selftest --benchmark' will run a new benchmarking selftest.
33
'bzr selftest --benchmark --lsprof-timed' will use lsprofile to generate
34
profile data for the individual profiled calls, allowing for fine
35
grained analysis of performance.
36
(Robert Collins, Martin Pool).
38
* 'bzr commit' shows a progress bar. This is useful for commits over sftp
39
where commit can take an appreciable time. (Robert Collins)
41
* 'bzr add' is now less verbose in telling you what ignore globs were
42
matched by files being ignored. Instead it just tells you how many
43
were ignored (because you might reasonably be expecting none to be
44
ignored). 'bzr add -v' is unchanged and will report every ignored
45
file. (Robert Collins).
47
* ftp now has a test server if medusa is installed. As part of testing,
48
ftp support has been improved, including support for supplying a
49
non-standard port. (John Arbash Meinel).
51
* 'bzr log --line' shows the revision number, and uses only the
52
first line of the log message (#5162, Alexander Belchenko;
55
* 'bzr status' has had the --all option removed. The 'bzr ls' command
56
should be used to retrieve all versioned files. (Robert Collins)
58
* 'bzr bundle OTHER/BRANCH' will create a bundle which can be sent
59
over email, and applied on the other end, while maintaining ancestry.
60
This bundle can be applied with either 'bzr merge' or 'bzr pull',
61
the same way you would apply another branch.
62
(John Arbash Meinel, Aaron Bentley)
64
* 'branches.conf' has been changed to 'locations.conf', since it can apply
65
to more locations than just branch locations.
70
* Fix shadowed definition of TestLocationConfig that caused some
71
tests not to run. (#32587, Erik Bågfors, Michael Ellerman,
74
* Fix unnecessary requirement of sign-my-commits that it be run from
75
a working directory. (Martin Pool, Robert Collins)
79
* Combine the ignore rules into a single regex rather than looping over
80
them to reduce the threshold where N^2 behaviour occurs in operations
81
like status. (Jan Hudec, Robert Collins).
83
* 'bzr push' should only push the ancestry of the current revision, not
84
all of the history in the repository. This is especially important for
85
shared repositories. (John Arbash Meinel)
87
* bzrlib.delta.compare_trees now iterates in alphabetically sorted order,
88
rather than randomly walking the inventories. (John Arbash Meinel)
90
* Split ``check`` into separate methods on the branch and on the repository,
91
so that it can be specialized in ways that are useful or efficient for
92
different formats. (Martin Pool, Robert Collins)
94
* Deprecate Repository.all_revision_ids; most methods don't really need
95
the global revision graph but only that part leading up to a particular
96
revision. (Martin Pool, Robert Collins)
98
* Add a BzrDirFormat control_formats list which allows for control formats
99
that do not use '.bzr' to store their data - i.e. '.svn', '.hg' etc.
100
(Robert Collins, Jelmer Vernooij).
102
* bzrlib.diff.external_diff can be redirected to any file-like object.
103
Uses subprocess instead of spawnvp.
104
(#4047, #48914, James Henstridge, John Arbash Meinel)
110
* setup.py failed to install launchpad plugin. (Martin Pool)
116
* Fix failure to commit a merge in a checkout. (Martin Pool,
117
Robert Collins, Erik Bågfors, #43959)
119
* Nicer messages from 'commit' in the case of renames, and correct
120
messages when a merge has occured. (Robert Collins, Martin Pool)
122
* Separate functionality from assert statements as they are skipped in
123
optimized mode of python. Add the same check to pending merges.
124
(#44443, Olaf Conradi)
128
* Do not show the None revision in output of bzr ancestry. (Olaf Conradi)
130
* Add info on standalone branches without a working tree.
131
(#44155, Olaf Conradi)
133
* Fix bug in knits when raising InvalidRevisionId. (#44284, Olaf Conradi)
137
* Make editor invocation comply with Debian Policy. First check
138
environment variables VISUAL and EDITOR, then try editor from
139
alternatives system. If that all fails, fall back to the pre-defined
140
list of editors. (#42904, Olaf Conradi)
144
* New 'register-branch' command registers a public branch into
145
Launchpad.net, where it can be associated with bugs, etc.
146
(Martin Pool, Bjorn Tillenius, Robert Collins)
150
* New public api in InventoryEntry - 'describe_change(old, new)' which
151
provides a human description of the changes between two old and
152
new. (Robert Collins, Martin Pool)
156
* Fix test case for bzr info in upgrading a standalone branch to metadir,
157
uses bzrlib api now. (Olaf Conradi)
161
NOTES WHEN UPGRADING:
163
Release 0.8 of bzr introduces a new format for history storage, called
164
'knit', as an evolution of to the 'weave' format used in 0.7. Local
165
and remote operations are faster using knits than weaves. Several
166
operations including 'init', 'init-repo', and 'upgrade' take a
167
--format option that controls this. Branching from an existing branch
168
will keep the same format.
170
It is possible to merge, pull and push between branches of different
171
formats but this is slower than moving data between homogenous
172
branches. It is therefore recommended (but not required) that you
173
upgrade all branches for a project at the same time. Information on
174
formats is shown by 'bzr info'.
176
bzr 0.8 now allows creation of 'repositories', which hold the history
177
of files and revisions for several branches. Previously bzr kept all
178
the history for a branch within the .bzr directory at the root of the
179
branch, and this is still the default. To create a repository, use
180
the new 'bzr init-repo' command. Branches exist as directories under
181
the repository and contain just a small amount of information
182
indicating the current revision of the branch.
184
bzr 0.8 also supports 'checkouts', which are similar to in cvs and
185
subversion. Checkouts are associated with a branch (optionally in a
186
repository), which contains all the historical information. The
187
result is that a checkout can be deleted without losing any
188
already-committed revisions. A new 'update' command is also available.
190
Repositories and checkouts are not supported with the 0.7 storage
191
format. To use them you must upgrad to either knits, or to the
192
'metaweave' format, which uses weaves but changes the .bzr directory
198
* Sftp paths can now be relative, or local, according to the lftp
199
convention. Paths now take the form:
200
sftp://user:pass@host:port/~/relative/path
202
sftp://user:pass@host:port/absolute/path
204
* The FTP transport now tries to reconnect after a temporary
205
failure. ftp put is made atomic. (Matthieu Moy)
207
* The FTP transport now maintains a pool of connections, and
208
reuses them to avoid multiple connections to the same host (like
209
sftp did). (Daniel Silverstone)
211
* The bzr_man.py file has been removed. To create the man page now,
212
use ./generate_docs.py man. The new program can also create other files.
213
Run "python generate_docs.py --help" for usage information. (Hans
214
Ulrich Niedermann & James Blackwell).
216
* Man Page now gives full help (James Blackwell). Help also updated to
217
reflect user config now being stored in .bazaar (Hans Ulrich
220
* It's now possible to set aliases in bazaar.conf (Erik Bågfors)
222
* Pull now accepts a --revision argument (Erik Bågfors)
224
* 'bzr re-sign' now allows multiple revisions to be supplied on the command
225
line. You can now use the following command to sign all of your old commits.
226
find .bzr/revision-store// -name my@email-* \
227
| sed 's/.*\/\/..\///' \
230
* Upgrade can now upgrade over the network. (Robert Collins)
232
* Two new commands 'bzr checkout' and 'bzr update' allow for CVS/SVN-alike
233
behaviour. By default they will cache history in the checkout, but
234
with --lightweight almost all data is kept in the master branch.
237
* 'revert' unversions newly-versioned files, instead of deleting them.
239
* 'merge' is more robust. Conflict messages have changed.
241
* 'merge' and 'revert' no longer clobber existing files that end in '~' or
244
* Default log format can be set in configuration and plugins can register
245
their own formatters. (Erik Bågfors)
247
* New 'reconcile' command will check branch consistency and repair indexes
248
that can become out of sync in pre 0.8 formats. (Robert Collins,
251
* New 'bzr init --format' and 'bzr upgrade --format' option to control
252
what storage format is created or produced. (Robert Collins,
255
* Add parent location to 'bzr info', if there is one. (Olaf Conradi)
257
* New developer commands 'weave-list' and 'weave-join'. (Martin Pool)
259
* New 'init-repository' command, plus support for repositories in 'init'
260
and 'branch' (Aaron Bentley, Erik Bågfors, Robert Collins)
262
* Improve output of 'info' command. Show all relevant locations related to
263
working tree, branch and repository. Use kibibytes for binary quantities.
264
Fix off-by-one error in missing revisions of working tree. Make 'info'
265
work on branches, repositories and remote locations. Show locations
266
relative to the shared repository, if applicable. Show locking status
267
of locations. (Olaf Conradi)
269
* Diff and merge now safely handle binary files. (Aaron Bentley)
271
* 'pull' and 'push' now normalise the revision history, so that any two
272
branches with the same tip revision will have the same output from 'log'.
275
* 'merge' accepts --remember option to store parent location, like 'push'
276
and 'pull'. (Olaf Conradi)
278
* bzr status and diff when files given as arguments do not exist
279
in the relevant trees. (Martin Pool, #3619)
281
* Add '.hg' to the default ignore list. (Martin Pool)
283
* 'knit' is now the default disk format. This improves disk performance and
284
utilization, increases incremental pull performance, robustness with SFTP
285
and allows checkouts over SFTP to perform acceptably.
286
The initial Knit code was contributed by Johan Rydberg based on a
287
specification by Martin Pool.
288
(Robert Collins, Aaron Bentley, Johan Rydberg, Martin Pool).
290
* New tool to generate all-in-one html version of the manual. (Alexander
293
* Hitting CTRL-C while doing an SFTP push will no longer cause stale locks
294
to be left in the SFTP repository. (Robert Collins, Martin Pool).
296
* New option 'diff --prefix' to control how files are named in diff
297
output, with shortcuts '-p0' and '-p1' corresponding to the options for
298
GNU patch. (Alexander Belchenko, Goffredo Baroncelli, Martin Pool)
300
* Add --revision option to 'annotate' command. (Olaf Conradi)
302
* Add --revision option to 'annotate' command. (Olaf Conradi)
304
* If bzr shows an unexpected revision-history after pulling (perhaps due
305
to a reweave) it can now be corrected by 'bzr reconcile'.
310
* Commit is now verbose by default, and shows changed filenames and the
311
new revision number. (Robert Collins, Martin Pool)
313
* Unify 'mv', 'move', 'rename'. (#5379, Matthew Fuller)
315
* 'bzr -h' shows help. (#35940, Martin Pool, Ian Bicking)
317
* Make 'pull' and 'push' remember location on failure using --remember.
320
* For compatibility, make old format for using weaves inside metadir
321
available as 'metaweave' format. Rename format 'metadir' to 'default'.
322
Clean up help for option --format in commands 'init', 'init-repo' and
323
'upgrade'. (Olaf Conradi)
327
* The internal storage of history, and logical branch identity have now
328
been split into Branch, and Repository. The common locking and file
329
management routines are now in bzrlib.lockablefiles.
330
(Aaron Bentley, Robert Collins, Martin Pool)
332
* Transports can now raise DependencyNotPresent if they need a library
333
which is not installed, and then another implementation will be
336
* Remove obsolete (and no-op) `decode` parameter to `Transport.get`.
339
* Using Tree Transform for merge, revert, tree-building
341
* WorkingTree.create, Branch.create, WorkingTree.create_standalone,
342
Branch.initialize are now deprecated. Please see BzrDir.create_* for
343
replacement API's. (Robert Collins)
345
* New BzrDir class represents the .bzr control directory and manages
346
formatting issues. (Robert Collins)
348
* New repository.InterRepository class encapsulates Repository to
349
Repository actions and allows for clean selection of optimised code
350
paths. (Robert Collins)
352
* bzrlib.fetch.fetch and bzrlib.fetch.greedy_fetch are now deprecated,
353
please use 'branch.fetch' or 'repository.fetch' depending on your
354
needs. (Robert Collins)
356
* deprecated methods now have a 'is_deprecated' flag on them that can
357
be checked, if you need to determine whether a given callable is
358
deprecated at runtime. (Robert Collins)
360
* Progress bars are now nested - see
361
bzrlib.ui.ui_factory.nested_progress_bar. (Robert Collins, Robey Pointer)
363
* New API call get_format_description() for each type of format.
366
* Changed branch.set_parent() to accept None to remove parent.
369
* Deprecated BzrError AmbiguousBase. (Olaf Conradi)
371
* WorkingTree.branch is now a read only property. (Robert Collins)
373
* bzrlib.ui.text.TextUIFactory now accepts a bar_type parameter which
374
can be None or a factory that will create a progress bar. This is
375
useful for testing or for overriding the bzrlib.progress heuristic.
378
* New API method get_physical_lock_status() to query locks present on a
379
transport. (Olaf Conradi)
381
* Repository.reconcile now takes a thorough keyword parameter to allow
382
requesting an indepth reconciliation, rather than just a data-loss
383
check. (Robert Collins)
385
* bzrlib.ui.ui_factory protocol now supports 'get_boolean' to prompt
386
the user for yes/no style input. (Robert Collins)
390
* SFTP tests now shortcut the SSH negotiation, reducing test overhead
391
for testing SFTP protocol support. (Robey Pointer)
393
* Branch formats are now tested once per implementation (see bzrlib.
394
tests.branch_implementations. This is analagous to the transport
395
interface tests, and has been followed up with working tree,
396
repository and BzrDir tests. (Robert Collins)
398
* New test base class TestCaseWithTransport provides a transport aware
399
test environment, useful for testing any transport-interface using
400
code. The test suite option --transport controls the transport used
401
by this class (when its not being used as part of implementation
402
contract testing). (Robert Collins)
404
* Close logging handler on disabling the test log. This will remove the
405
handler from the internal list inside python's logging module,
406
preventing shutdown from closing it twice. (Olaf Conradi)
408
* Move test case for uncommit to blackbox tests. (Olaf Conradi)
410
* run_bzr and run_bzr_captured now accept a 'stdin="foo"' parameter which
411
will provide String("foo") to the command as its stdin.
417
* .bzrignore is excluded from exports, on the grounds that it's a bzr
418
internal-use file and may not be wanted. (Jamie Wilkinson)
420
* The "bzr directories" command were removed in favor of the new
421
--kind option to the "bzr inventory" command. To list all
422
versioned directories, now use "bzr inventory --kind directory".
425
* Under Windows configuration directory is now %APPDATA%\bazaar\2.0
426
by default. (John Arbash Meinel)
428
* The parent of Bzr configuration directory can be set by BZR_HOME
429
environment variable. Now the path for it is searched in BZR_HOME, then
430
in HOME. Under Windows the order is: BZR_HOME, APPDATA (usually
431
points to C:\Documents and Settings\User Name\Application Data), HOME.
434
* Plugins with the same name in different directories in the bzr plugin
435
path are no longer loaded: only the first successfully loaded one is
436
used. (Robert Collins)
438
* Use systems' external ssh command to open connections if possible.
439
This gives better integration with user settings such as ProxyCommand.
442
* Permissions on files underneath .bzr/ are inherited from the .bzr
443
directory. So for a shared repository, simply doing 'chmod -R g+w .bzr/'
444
will mean that future file will be created with group write permissions.
446
* configure.in and config.guess are no longer in the builtin default
449
* '.sw[nop]' pattern ignored, to ignore vim swap files for nameless
450
files. (John Arbash Meinel, Martin Pool)
454
* "bzr INIT dir" now initializes the specified directory, and creates
455
it if it does not exist. (John Arbash Meinel)
457
* New remerge command (Aaron Bentley)
459
* Better zsh completion script. (Steve Borho)
461
* 'bzr diff' now returns 1 when there are changes in the working
462
tree. (Robert Collins)
464
* 'bzr push' now exists and can push changes to a remote location.
465
This uses the transport infrastructure, and can store the remote
466
location in the ~/.bazaar/branches.conf configuration file.
469
* Test directories are only kept if the test fails and the user requests
472
* Tweaks to short log printing
474
* Added branch nicks, new nick command, printing them in log output.
477
* If $BZR_PDB is set, pop into the debugger when an uncaught exception
478
occurs. (Martin Pool)
480
* Accept 'bzr resolved' (an alias for 'bzr resolve'), as this is
481
the same as Subversion. (Martin Pool)
483
* New ftp transport support (on ftplib), for ftp:// and aftp://
484
URLs. (Daniel Silverstone)
486
* Commit editor temporary files now start with 'bzr_log.', to allow
487
text editors to match the file name and set up appropriate modes or
488
settings. (Magnus Therning)
490
* Improved performance when integrating changes from a remote weave.
491
(Goffredo Baroncelli)
493
* Sftp will attempt to cache the connection, so it is more likely that
494
a connection will be reused, rather than requiring multiple password
497
* bzr revno now takes an optional argument indicating the branch whose
498
revno should be printed. (Michael Ellerman)
500
* bzr cat defaults to printing the last version of the file.
501
(#3632, Matthieu Moy)
503
* New global option 'bzr --lsprof COMMAND' runs bzr under the lsprof
504
profiler. (Denys Duchier)
506
* Faster commits by reading only the headers of affected weave files.
509
* 'bzr add' now takes a --dry-run parameter which shows you what would be
510
added, but doesn't actually add anything. (Michael Ellerman)
512
* 'bzr add' now lists how many files were ignored per glob. add --verbose
513
lists the specific files. (Aaron Bentley)
515
* 'bzr missing' now supports displaying changes in diverged trees and can
516
be limited to show what either end of the comparison is missing.
517
(Aaron Bently, with a little prompting from Daniel Silverstone)
521
* SFTP can walk up to the root path without index errors. (Robert Collins)
523
* Fix bugs in running bzr with 'python -O'. (Martin Pool)
525
* Error when run with -OO
527
* Fix bug in reporting http errors that don't have an http error code.
530
* Handle more cases of pipe errors in display commands
532
* Change status to 3 for all errors
534
* Files that are added and unlinked before committing are completely
535
ignored by diff and status
537
* Stores with some compressed texts and some uncompressed texts are now
538
able to be used. (John A Meinel)
540
* Fix for bzr pull failing sometimes under windows
542
* Fix for sftp transport under windows when using interactive auth
544
* Show files which are both renamed and modified as such in 'bzr
545
status' output. (#4503, Daniel Silverstone)
547
* Make annotate cope better with revisions committed without a valid
548
email address. (Marien Zwart)
550
* Fix representation of tab characters in commit messages. (Harald
553
* List of plugin directories in BZR_PLUGIN_PATH environment variable is
554
now parsed properly under Windows. (Alexander Belchenko)
556
* Show number of revisions pushed/pulled/merged. (Robey Pointer)
558
* Keep a cached copy of the basis inventory to speed up operations
559
that need to refer to it. (Johan Rydberg, Martin Pool)
561
* Fix bugs in bzr status display of non-ascii characters. (Martin
564
* Remove Makefile.in from default ignore list. (#6413, Tollef Fog
567
* Fix failure in 'bzr added'. (Nathan McCallum, Martin Pool)
571
* Fix selftest asking for passwords when there are no SFTP keys.
572
(Robey Pointer, Jelmer Vernooij)
574
* Fix selftest run with 'python -O'. (Martin Pool)
576
* Fix HTTP tests under Windows. (John Arbash Meinel)
578
* Make tests work even if HOME is not set (Aaron Bentley)
580
* Updated build_tree to use fixed line-endings for tests which read
581
the file cotents and compare. Make some tests use this to pass under
582
Windows. (John Arbash Meinel)
584
* Skip stat and symlink tests under Windows. (Alexander Belchenko)
586
* Delay in selftest/testhashcash is now issued under win32 and Cygwin.
589
* Use terminal width to align verbose test output. (Martin Pool)
591
* Blackbox tests are maintained within the bzrlib.tests.blackbox directory.
592
If adding a new test script please add that to
593
bzrlib.tests.blackbox.__init__. (Robert Collins)
595
* Much better error message if one of the test suites can't be
596
imported. (Martin Pool)
598
* Make check now runs the test suite twice - once with the default locale,
599
and once with all locales forced to C, to expose bugs. This is not
600
trivially done within python, so for now its only triggered by running
601
Make check. Integrators and packagers who wish to check for full
602
platform support should run 'make check' to test the source.
605
* Tests can now run TestSkipped if they can't execute for any reason.
606
(Martin Pool) (NB: TestSkipped should only be raised for correctable
607
reasons - see the wiki spec ImprovingBzrTestSuite).
609
* Test sftp with relative, absolute-in-homedir and absolute-not-in-homedir
610
paths for the transport tests. Introduce blackbox remote sftp tests that
611
test the same permutations. (Robert Collins, Robey Pointer)
613
* Transport implementation tests are now independent of the local file
614
system, which allows tests for esoteric transports, and for features
615
not available in the local file system. They also repeat for variations
616
on the URL scheme that can introduce issues in the transport code,
617
see bzrlib.transport.TransportTestProviderAdapter() for this.
620
* TestCase.build_tree uses the transport interface to build trees, pass
621
in a transport parameter to give it an existing connection.
626
* WorkingTree.pull has been split across Branch and WorkingTree,
627
to allow Branch only pulls. (Robert Collins)
629
* commands.display_command now returns the result of the decorated
630
function. (Robert Collins)
632
* LocationConfig now has a set_user_option(key, value) call to save
633
a setting in its matching location section (a new one is created
634
if needed). (Robert Collins)
636
* Branch has two new methods, get_push_location and set_push_location
637
to respectively, get and set the push location. (Robert Collins)
639
* commands.register_command now takes an optional flag to signal that
640
the registrant is planning to decorate an existing command. When
641
given multiple plugins registering a command is not an error, and
642
the original command class (whether built in or a plugin based one) is
643
returned to the caller. There is a new error 'MustUseDecorated' for
644
signalling when a wrapping command should switch to the original
645
version. (Robert Collins)
647
* Some option parsing errors will raise 'BzrOptionError', allowing
648
granular detection for decorating commands. (Robert Collins).
650
* Branch.read_working_inventory has moved to
651
WorkingTree.read_working_inventory. This necessitated changes to
652
Branch.get_root_id, and a move of Branch.set_inventory to WorkingTree
653
as well. To make it clear that a WorkingTree cannot always be obtained
654
Branch.working_tree() will raise 'errors.NoWorkingTree' if one cannot
655
be obtained. (Robert Collins)
657
* All pending merges operations from Branch are now on WorkingTree.
660
* The follow operations from Branch have moved to WorkingTree:
668
* bzrlib.add.smart_add_branch is now smart_add_tree. (Robert Collins)
670
* New "rio" serialization format, similar to rfc-822. (Martin Pool)
672
* Rename selftests to `bzrlib.tests.test_foo`. (John A Meinel, Martin
675
* bzrlib.plugin.all_plugins has been changed from an attribute to a
676
query method. (Robert Collins)
678
* New options to read only the table-of-contents of a weave.
681
* Raise NoSuchFile when someone tries to add a non-existant file.
684
* Simplify handling of DivergedBranches in cmd_pull().
688
* Branch.controlfile* logic has moved to lockablefiles.LockableFiles, which
689
is exposed as Branch().control_files. Also this has been altered with the
690
controlfile pre/suffix replaced by simple method names like 'get' and
691
'put'. (Aaron Bentley, Robert Collins).
693
* Deprecated functions and methods can now be marked as such using the
694
bzrlib.symbol_versioning module. Marked method have their docstring
695
updated and will issue a DeprecationWarning using the warnings module
696
when they are used. (Robert Collins)
698
* bzrlib.osutils.safe_unicode now exists to provide parameter coercion
699
for functions that need unicode strings. (Robert Collins)
705
* pull now takes --verbose to show you what revisions are added or removed
708
* merge now takes a --show-base option to include the base text in
712
* The config files are now read using ConfigObj, so '=' should be used as
713
a separator, not ':'.
716
* New 'bzr commit --strict' option refuses to commit if there are
717
any unknown files in the tree. To commit, make sure all files are
718
either ignored, added, or deleted. (Michael Ellerman)
720
* The config directory is now ~/.bazaar, and there is a single file
721
~/.bazaar/bazaar.conf storing email, editor and other preferences.
724
* 'bzr add' no longer takes a --verbose option, and a --quiet option
725
has been added that suppresses all output.
727
* Improved zsh completion support in contrib/zsh, from Clint
730
* Builtin 'bzr annotate' command, by Martin Pool with improvements from
733
* 'bzr check' now accepts -v for verbose reporting, and checks for
734
ghosts in the branch. (Robert Collins)
736
* New command 're-sign' which will regenerate the gpg signature for
737
a revision. (Robert Collins)
739
* If you set check_signatures=require for a path in
740
~/.bazaar/branches.conf then bzr will invoke your
741
gpg_signing_command (defaults to gpg) and record a digital signature
742
of your commit. (Robert Collins)
744
* New sftp transport, based on Paramiko. (Robey Pointer)
746
* 'bzr pull' now accepts '--clobber' which will discard local changes
747
and make this branch identical to the source branch. (Robert Collins)
749
* Just give a quieter warning if a plugin can't be loaded, and
750
put the details in .bzr.log. (Martin Pool)
752
* 'bzr branch' will now set the branch-name to the last component of the
753
output directory, if one was supplied.
755
* If the option 'post_commit' is set to one (or more) python function
756
names (must be in the bzrlib namespace), then they will be invoked
757
after the commit has completed, with the branch and revision_id as
758
parameters. (Robert Collins)
760
* Merge now has a retcode of 1 when conflicts occur. (Robert Collins)
762
* --merge-type weave is now supported for file contents. Tree-shape
763
changes are still three-way based. (Martin Pool, Aaron Bentley)
765
* 'bzr check' allows the first revision on revision-history to have
766
parents - something that is expected for cheap checkouts, and occurs
767
when conversions from baz do not have all history. (Robert Collins).
769
* 'bzr merge' can now graft unrelated trees together, if your specify
770
0 as a base. (Aaron Bentley)
772
* 'bzr commit branch' and 'bzr commit branch/file1 branch/file2' now work
775
* Add '.sconsign*' to default ignore list. (Alexander Belchenko)
777
* 'bzr merge --reprocess' minimizes conflicts
781
* The 'bzr selftest --pattern' option for has been removed, now
782
test specifiers on the command line can be simple strings, or
783
regexps, or both. (Robert Collins)
785
* Passing -v to selftest will now show the time each test took to
786
complete, which will aid in analysing performance regressions and
787
related questions. (Robert Collins)
789
* 'bzr selftest' runs all tests, even if one fails, unless '--one'
790
is given. (Martin Pool)
792
* There is a new method for TestCaseInTempDir, assertFileEqual, which
793
will check that a given content is equal to the content of the named
794
file. (Robert Collins)
796
* Fix test suite's habit of leaving many temporary log files in $TMPDIR.
801
* New 'testament' command and concept for making gpg-signatures
802
of revisions that are not tied to a particular internal
803
representation. (Martin Pool).
805
* Per-revision properties ('revprops') as key-value associated
806
strings on each revision created when the revision is committed.
807
Intended mainly for the use of external tools. (Martin Pool).
809
* Config options have moved from bzrlib.osutils to bzrlib.config.
812
* Improved command line option definitions allowing explanations
813
for individual options, among other things. Contributed by
816
* Config options have moved from bzrlib.osutils to bzrlib.config.
817
Configuration is now done via the config.Config interface:
818
Depending on whether you have a Branch, a Location or no information
819
available, construct a *Config, and use its signature_checking,
820
username and user_email methods. (Robert Collins)
822
* Plugins are now loaded under bzrlib.plugins, not bzrlib.plugin, and
823
they are made available for other plugins to use. You should not
824
import other plugins during the __init__ of your plugin though, as
825
no ordering is guaranteed, and the plugins directory is not on the
826
python path. (Robert Collins)
828
* Branch.relpath has been moved to WorkingTree.relpath. WorkingTree no
829
no longer takes an inventory, rather it takes an option branch
830
parameter, and if None is given will open the branch at basedir
831
implicitly. (Robert Collins)
833
* Cleaner exception structure and error reporting. Suggested by
834
Scott James Remnant. (Martin Pool)
836
* Branch.remove has been moved to WorkingTree, which has also gained
837
lock_read, lock_write and unlock methods for convenience. (Robert
840
* Two decorators, needs_read_lock and needs_write_lock have been added
841
to the branch module. Use these to cause a function to run in a
842
read or write lock respectively. (Robert Collins)
844
* Branch.open_containing now returns a tuple (Branch, relative-path),
845
which allows direct access to the common case of 'get me this file
846
from its branch'. (Robert Collins)
848
* Transports can register using register_lazy_transport, and they
849
will be loaded when first used. (Martin Pool)
851
* 'pull' has been factored out of the command as WorkingTree.pull().
852
A new option to WorkingTree.pull has been added, clobber, which will
853
ignore diverged history and pull anyway.
856
* config.Config has a 'get_user_option' call that accepts an option name.
857
This will be looked up in branches.conf and bazaar.conf as normal.
858
It is intended that this be used by plugins to support options -
859
options of built in programs should have specific methods on the config.
862
* merge.merge_inner now has tempdir as an optional parameter. (Robert
865
* Tree.kind is not recorded at the top level of the hierarchy, as it was
866
missing on EmptyTree, leading to a bug with merge on EmptyTrees.
869
* WorkingTree.__del__ has been removed, it was non deterministic and not
870
doing what it was intended to. See WorkingTree.__init__ for a comment
871
about future directions. (Robert Collins/Martin Pool)
873
* bzrlib.transport.http has been modified so that only 404 urllib errors
874
are returned as NoSuchFile. Other exceptions will propogate as normal.
875
This allows debuging of actual errors. (Robert Collins)
877
* bzrlib.transport.Transport now accepts *ONLY* url escaped relative paths
878
to apis like 'put', 'get' and 'has'. This is to provide consistent
879
behaviour - it operates on url's only. (Robert Collins)
881
* Transports can register using register_lazy_transport, and they
882
will be loaded when first used. (Martin Pool)
884
* 'merge_flex' no longer calls conflict_handler.finalize(), instead that
885
is called by merge_inner. This is so that the conflict count can be
886
retrieved (and potentially manipulated) before returning to the caller
887
of merge_inner. Likewise 'merge' now returns the conflict count to the
888
caller. (Robert Collins)
890
* 'revision.revision_graph can handle having only partial history for
891
a revision - that is no revisions in the graph with no parents.
894
* New builtins.branch_files uses the standard file_list rules to produce
895
a branch and a list of paths, relative to that branch (Aaron Bentley)
897
* New TestCase.addCleanup facility.
899
* New bzrlib.version_info tuple (similar to sys.version_info), which can
900
be used by programs importing bzrlib.
904
* Better handling of branches in directories with non-ascii names.
905
(Joel Rosdahl, Panagiotis Papadakos)
907
* Upgrades of trees with no commits will not fail due to accessing
908
[-1] in the revision-history. (Andres Salomon)
915
* Fix problem in pulling over http from machines that do not
916
allow directories to be listed.
918
* Avoid harmless warning about invalid hash cache after
919
upgrading branch format.
923
* Avoid some unnecessary http operations in branch and pull.
930
* 'bzr branch' over http initially gives a very high estimate
931
of completion time but it should fall as the first few
932
revisions are pulled in. branch is still slow on
933
high-latency connections.
937
* bzr-man.py has been updated to work again. Contributed by
940
* Locking is now done with fcntl.lockf which works with NFS
941
file systems. Contributed by Harald Meland.
943
* When a merge encounters a file that has been deleted on
944
one side and modified on the other, the old contents are
945
written out to foo.BASE and foo.SIDE, where SIDE is this
946
or OTHER. Contributed by Aaron Bentley.
948
* Export was choosing incorrect file paths for the content of
949
the tarball, this has been fixed by Aaron Bentley.
951
* Commit will no longer commit without a log message, an
952
error is returned instead. Contributed by Jelmer Vernooij.
954
* If you commit a specific file in a sub directory, any of its
955
parent directories that are added but not listed will be
956
automatically included. Suggested by Michael Ellerman.
958
* bzr commit and upgrade did not correctly record new revisions
959
for files with only a change to their executable status.
960
bzr will correct this when it encounters it. Fixed by
963
* HTTP tests now force off the use of http_proxy for the duration.
964
Contributed by Gustavo Niemeyer.
966
* Fix problems in merging weave-based branches that have
967
different partial views of history.
969
* Symlink support: working with symlinks when not in the root of a
970
bzr tree was broken, patch from Scott James Remnant.
975
* 'branch' now accepts a --basis parameter which will take advantage
976
of local history when making a new branch. This allows faster
977
branching of remote branches. Contributed by Aaron Bentley.
979
* New tree format based on weave files, called version 5.
980
Existing branches can be upgraded to this format using
983
* Symlinks are now versionable. Initial patch by
984
Erik Toubro Nielsen, updated to head by Robert Collins.
986
* Executable bits are tracked on files. Patch from Gustavo
989
* 'bzr status' now shows unknown files inside a selected directory.
990
Patch from Heikki Paajanen.
992
* Merge conflicts are recorded in .bzr. Two new commands 'conflicts'
993
and 'resolve' have needed added, which list and remove those
994
merge conflicts respectively. A conflicted tree cannot be committed
995
in. Contributed by Aaron Bentley.
997
* 'rm' is now an alias for 'remove'.
999
* Stores now split out their content in a single byte prefixed hash,
1000
dropping the density of files per directory by 256. Contributed by
1003
* 'bzr diff -r branch:URL' will now perform a diff between two branches.
1004
Contributed by Robert Collins.
1006
* 'bzr log' with the default formatter will show merged revisions,
1007
indented to the right. Initial implementation contributed by Gustavo
1008
Niemeyer, made incremental by Robert Collins.
1013
* Test case failures have the exception printed after the log
1014
for your viewing pleasure.
1016
* InventoryEntry is now an abstract base class, use one of the
1017
concrete InventoryDirectory etc classes instead.
1019
* Branch raises an UnsupportedFormatError when it detects a
1020
bzr branch it cannot understand. This allows for precise
1021
handling of such circumstances.
1026
* Removed testsweet module so that tests can be run after
1027
bzr installed by 'bzr selftest'.
1029
* 'bzr selftest' command-line arguments can now be partial ids
1030
of tests to run, e.g. 'bzr selftest test_weave'
1033
bzr 0.0.9 2005-09-23
1037
* Fixed "branch -r" option.
1039
* Fix remote access to branches containing non-compressed history.
1042
* Better reliability of http server tests. (John Arbash-Meinel)
1044
* Merge graph maximum distance calculation fix. (Aaron Bentley)
1046
* Various minor bug in windows support have been fixed, largely in the
1047
test suite. Contributed by Alexander Belchenko.
1051
* Status now accepts a -r argument to give status between chosen
1052
revisions. Contributed by Heikki Paajanen.
1054
* Revision arguments no longer use +/-/= to control ranges, instead
1055
there is a 'before' namespace, which limits the successive namespace.
1056
For example '$ bzr log -r date:yesterday..before:date:today' will
1057
select everything from yesterday and before today. Contributed by
1060
* There is now a bzr.bat file created by distutils when building on
1061
Windows. Contributed by Alexander Belchenko.
1065
* Removed uuid() as it was unused.
1067
* Improved 'fetch' code for pulling revisions from one branch into
1068
another (used by pull, merged, etc.)
1071
bzr 0.0.8 2005-09-20
1075
* Adding a file whose parent directory is not versioned will
1076
implicitly add the parent, and so on up to the root. This means
1077
you should never need to explictly add a directory, they'll just
1078
get added when you add a file in the directory. Contributed by
1081
* Ignore .DS_Store (contains Mac metadata) by default. Patch from
1084
* If you set BZR_EDITOR in the environment, it is checked in
1085
preference to EDITOR and the config file for the interactive commit
1086
editing program. Related to this is a bugfix where a missing program
1087
set in EDITOR would cause editing to fail, now the fallback program
1088
for the operating system is still tried.
1090
* Files that are not directories/symlinks/regular files will no longer
1091
cause bzr to fail, it will just ignore them by default. You cannot add
1092
them to the tree though - they are not versionable.
1097
* Refactor xml packing/unpacking.
1101
* Fixed 'bzr mv' by Ollie Rutherfurd.
1103
* Fixed strange error when trying to access a nonexistent http
1106
* Make sure that the hashcache gets written out if it can't be
1112
* Various Windows fixes from Ollie Rutherfurd.
1114
* Quieten warnings about locking; patch from Matt Lavin.
1117
bzr-0.0.7 2005-09-02
1121
* ``bzr shell-complete`` command contributed by Clint Adams to
1122
help with intelligent shell completion.
1124
* New expert command ``bzr find-merge-base`` for debugging merges.
1129
* Much better merge support.
1131
* merge3 conflicts are now reported with markers like '<<<<<<<'
1132
(seven characters) which is the same as CVS and pleases things
1138
* ``bzr upgrade`` no longer fails when trying to fix trees that
1139
mention revisions that are not present.
1141
* Fixed bugs in listing plugins from ``bzr plugins``.
1143
* Fix case of $EDITOR containing options for the editor.
1145
* Fix log -r refusing to show the last revision.
1146
(Patch from Goffredo Baroncelli.)
1151
* ``bzr log --show-ids`` shows the revision ids of all parents.
1153
* Externally provided commands on your $BZRPATH no longer need
1154
to recognize --bzr-usage to work properly, and can just handle
1160
* Changed trace messages to go through the standard logging
1161
framework, so that they can more easily be redirected by
1166
bzr-0.0.6 2005-08-18
1170
* Python plugins, automatically loaded from the directories on
1171
BZR_PLUGIN_PATH or ~/.bzr.conf/plugins by default.
1173
* New 'bzr mkdir' command.
1175
* Commit mesage is fetched from an editor if not given on the
1176
command line; patch from Torsten Marek.
1178
* ``bzr log -m FOO`` displays commits whose message matches regexp
1181
* ``bzr add`` with no arguments adds everything under the current directory.
1183
* ``bzr mv`` does move or rename depending on its arguments, like
1186
* ``bzr missing`` command shows a summary of the differences
1187
between two trees. (Merged from John Arbash-Meinel.)
1189
* An email address for commits to a particular tree can be
1190
specified by putting it into .bzr/email within a branch. (Based
1191
on a patch from Heikki Paajanen.)
1196
* Faster working tree operations.
1201
* 3rd-party modules shipped with bzr are copied within the bzrlib
1202
python package, so that they can be installed by the setup
1203
script without clashing with anything already existing on the
1204
system. (Contributed by Gustavo Niemeyer.)
1206
* Moved plugins directory to bzrlib/, so that there's a standard
1207
plugin directory which is not only installed with bzr itself but
1208
is also available when using bzr from the development tree.
1209
BZR_PLUGIN_PATH and DEFAULT_PLUGIN_PATH are then added to the
1210
standard plugins directory.
1212
* When exporting to a tarball with ``bzr export --format tgz``, put
1213
everything under a top directory rather than dumping it into the
1214
current directory. This can be overridden with the ``--root``
1215
option. Patch from William Dodé and John Meinel.
1217
* New ``bzr upgrade`` command to upgrade the format of a branch,
1218
replacing ``bzr check --update``.
1220
* Files within store directories are no longer marked readonly on
1223
* Changed ``bzr log`` output to a more compact form suggested by
1224
John A Meinel. Old format is available with the ``--long`` or
1225
``-l`` option, patched by William Dodé.
1227
* By default the commit command refuses to record a revision with
1228
no changes unless the ``--unchanged`` option is given.
1230
* The ``--no-plugins``, ``--profile`` and ``--builtin`` command
1231
line options must come before the command name because they
1232
affect what commands are available; all other options must come
1233
after the command name because their interpretation depends on
1236
* ``branch`` and ``clone`` added as aliases for ``branch``.
1238
* Default log format is back to the long format; the compact one
1239
is available with ``--short``.
1244
* Fix bugs in committing only selected files or within a subdirectory.
1247
bzr-0.0.5 2005-06-15
1251
* ``bzr`` with no command now shows help rather than giving an
1252
error. Suggested by Michael Ellerman.
1254
* ``bzr status`` output format changed, because svn-style output
1255
doesn't really match the model of bzr. Now files are grouped by
1256
status and can be shown with their IDs. ``bzr status --all``
1257
shows all versioned files and unknown files but not ignored files.
1259
* ``bzr log`` runs from most-recent to least-recent, the reverse
1260
of the previous order. The previous behaviour can be obtained
1261
with the ``--forward`` option.
1263
* ``bzr inventory`` by default shows only filenames, and also ids
1264
if ``--show-ids`` is given, in which case the id is the second
5
1270
* New 'bzr whoami --email' option shows only the email component
6
1271
of the user identification, from Jo Vermeulen.
8
* New 'bzr ignore PATTERN' command.
1273
* New ``bzr ignore PATTERN`` command.
10
1275
* Nicer error message for broken pipe, interrupt and similar
11
1276
conditions that don't indicate an internal error.
13
* Add ``.*.swp .*.tmp *,v`` to default ignore patterns.
1278
* Add ``.*.sw[nop] .git .*.tmp *,v`` to default ignore patterns.
15
1280
* Per-branch locks keyed on ``.bzr/branch-lock``, available in
16
1281
either read or write mode.
added
removed
NEWS
