~bzr-pqm/bzr/bzr.dev

==========================

KnitPack repository format

==========================

.. contents::

Using KnitPack repositories

===========================

Motivation

----------

KnitPack is a new repository format for Bazaar, which is expected to be

faster both locally and over the network, is usually more compact, and

will work with more FTP servers.

Our benchmarking results to date have been very promising. We fully expect

to make a pack-based format the default in the near future.  We would

therefore like as many people as possible using KnitPack repositories,

benchmarking the results and telling us where improvements are still needed.

Preparation

-----------

A small percentage of existing repositories may have some inconsistent

data within them. It's is a good idea to check the integrity of your

repositories before migrating them to knitpack format. To do this, run::

  bzr check

If that reports a problem, run this command::

  bzr reconcile

Note that this can take many hours for repositories with deep history

so be sure to set aside some time for this if it is required.

Creating a new knitpack branch

------------------------------

If you're starting a project from scratch, it's easy to make it a

``knitpack`` one. Here's how::

  cd my-stuff

  bzr init --pack-0.92

  bzr add

  bzr commit -m "initial import"

In other words, use the normal sequence of commands but add the

``--pack-0.92`` option to the ``init`` command.

**Note:** In bzr 0.92, this format was called ``knitpack-experimental``.

Creating a new knitpack repository

----------------------------------

If you're starting a project from scratch and wish to use a shared repository

for branches, you can make it a ``knitpack`` repository like this::

  cd my-repo

  bzr init-repo --pack-0.92 .

  cd my-stuff

  bzr init

  bzr add

  bzr commit -m "initial import"

In other words, use the normal sequence of commands but add the

``--pack-0.92`` option to the ``init-repo`` command.

Upgrading an existing branch or repository to knitpack format

-------------------------------------------------------------

If you have an existing branch and wish to migrate it to

a ``knitpack`` format, use the ``upgrade`` command like this::

  bzr upgrade --pack-0.92 path-to-my-branch

If you are using a shared repository, run::

  bzr upgrade --pack-0.92 ROOT_OF_REPOSITORY

to upgrade the history database. Note that this will not

alter the branch format of each branch, so

you will need to also upgrade each branch individually

if you are upgrading from an old (e.g. < 0.17) bzr.

More modern bzr's will already have the branch format at

our latest branch format which adds support for tags.

Starting a new knitpack branch from one in an older format

----------------------------------------------------------

This can be done in one of several ways:

1. Create a new branch and pull into it

2. Create a standalone branch and upgrade its format

3. Create a knitpack shared repository and branch into it

Here are the commands for using the ``pull`` approach::

    bzr init --pack-0.92 my-new-branch

    cd my-new-branch

    bzr pull my-source-branch

Here are the commands for using the ``upgrade`` approach::

    bzr branch my-source-branch my-new-branch

    cd my-new-branch

    bzr upgrade --pack-0.92 .

Here are the commands for the shared repository approach::

  cd my-repo

  bzr init-repo --pack-0.92 .

  bzr branch my-source-branch my-new-branch

  cd my-new-branch

As a reminder, any of the above approaches can fail if the source branch

has inconsistent data within it and hasn't been reconciled yet. Please

be sure to check that before reporting problems.

Testing packs for bzr-svn users

-------------------------------

If you are using ``bzr-svn`` or are testing the prototype subtree support,

you can still use and assist in testing KnitPacks. The commands to use

are identical to the ones given above except that the name of the format

to use is ``knitpack-subtree-experimental``.

WARNING: Note that the subtree formats, ``dirstate-subtree`` and

``knitpack-subtree-experimental``, are **not** production strength yet and

may cause unexpected problems. They are required for the bzr-svn

plug-in but should otherwise only be used by people happy to live on the

bleeding edge. If you are using bzr-svn, you're on the bleeding edge anyway.

:-)

Reporting problems

------------------

If you need any help or encounter any problems, please contact the developers

via the usual ways, i.e. chat to us on IRC or send a message to our mailing

list. See http://wiki.bazaar.canonical.com/BzrSupport for contact details.

Technical notes

===============

Bazaar 0.92 adds a new format (experimental at first) implemented in

``bzrlib.repofmt.pack_repo.py``.

This format provides a knit-like interface which is quite compatible

with knit format repositories: you can get a VersionedFile for a

particular file-id, or for revisions, or for the inventory, even though

these do not correspond to single files on disk.

The on-disk format is that the repository directory contains these

files and subdirectories:

==================== =============================================

packs/               completed readonly packs

indices/             indices for completed packs

upload/              temporary files for packs currently being

                     written

obsolete_packs/      packs that have been repacked and are no

                     longer normally needed

pack-names           index of all live packs

lock/                lockdir

==================== =============================================

Note that for consistency we always write "indices" not "indexes".

This is implemented on top of pack files, which are written once from

start to end, then left alone.  A pack consists of a body file, plus

several index files.  There are four index files for each pack, which

have the same basename and an extension indicating the purpose of the

index:

======== ========== ======================== ==========================

extn     Purpose    Key                      References

======== ========== ======================== ==========================

``.tix`` File texts ``file_id, revision_id`` per-file parents,

                                             compression basis

                                             per-file parents

``.six`` Signatures ``revision_id,``         -

``.rix`` Revisions  ``revision_id,``         revision parents

``.iix`` Inventory  ``revision_id,``         revision parents,

                                             compression base

======== ========== ======================== ==========================

Indices are accessed through the ``bzrlib.index.GraphIndex`` class.

Indices are stored as sorted files on disk.  Each line is one record,

and contains:

 * key fields

 * a value string - for all these indices, this is an ascii decimal pair

   of "offset length" giving the position of the referenced data within

   the pack body file

 * a list of zero or more reference lists

The reference lists let a graph be stored within the index.  Each

reference list entry points to another entry in the same index.  The

references are represented as a byte offset for the target within the

index file.

When a compression base is given, it indicates that the body of the text

or inventory is a forward delta from the referenced revision.  The

compression base list must have length 0 or 1.

Like packs, indexes are written only once and then unmodified.  A

GraphIndex builder is a mutable in-memory graph that can be sorted,

cross-referenced and written out when the write group completes.

There can also be index entries with a value of 'a' for absent.  These

records exist just to be pointed to in a graph.  This is used, for

example, to give the revision-parent pointer when the parent revision is

in a previous pack.

The data content for each record is a knit data chunk.  The knits are

always unannotated - the annotations must be generated when needed.

(We'd like to cache/memoize the annotations.)  The data hunks can be

moved between packs without needing to recompress them.

It is not possible to regenerate an index from the body file, because it

contains information stored in the knit index that's not in the body.

(In particular, the per-file graph is only stored in the index.)

We would like to change this in a future format.

The lock is a regular LockDir lock.  The lock is only held for a much

reduced scope, while updating the pack-names file.  The bulk of the

insertion can be done without the repository locked.  This is an

implementation detail; the repository user should still call

``repository.lock_write`` at the regular time but be aware this does not

correspond to a physical mutex.

Read locks control caching but do not affect writers.

The newly-added repository write group concept is very important to

KnitPack repositories.  When ``start_write_group`` is called, a new

temporary pack is created and all modifications to the repository will

go into it until either ``commit_write_group`` or ``abort_write_group``

is called, at which time it is either finished and moved into place or

discarded respectively.  Write groups cannot be nested, only one can be

underway at a time on a Repository instance and they must occur within a

write lock.

Normally the data for each revision will be entirely within a single

pack but this is not required.

When a pack is finished, it gets a final name based on the md5 of all

the data written into the pack body file.

The ``pack-names`` file gives the list of all finished non-obsolete

packs.  (This should always be the same as the list of files in the

``packs/`` directory, but the file is needed for read-only HTTP clients

that can't easily list directories, and it includes other information.)

The constraint on the ``pack-names`` list is that every file mentioned

must exist in the ``packs/`` directory.

In rare cases, when a writer is interrupted, about-to-be-removed packs

may still be present in the directory but removed from the list.

As well as the list of names, the pack-names file also contains the

size, in bytes, of each of the four indices.  This is used to bootstrap

bisection search within the indices.

In normal use, one pack will be created for each commit to a repository.

This would build up to an inefficient number of files over time, so a

``repack`` operation is available to recombine them, by producing larger

files containing data on multiple revisions.  This can be done manually

by running ``bzr pack``, and it also may happen automatically when a

write group is committed.

The repacking strategy used at the moment tries to balance not doing too

much work during commit with not having too many small files left in the

repository.  The algorithm is roughly this: the total number of

revisions in the repository is expressed as a decimal number, e.g.

"532".  Then we'll repack until we have five packs containing a hundred

revisions each, three packs containing ten revisions each, and two packs

with single revisions.  This means that each revision will normally

initially be created in a single-revision pack, then moved to a

ten-revision pack, then to a 100-pack, and so on.

As with other repositories, in normal use data is only inserted.

However, in some circumstances we may want to garbage-collect or prune

existing data, or reconcile indexes.

..

   vim: tw=72 ft=rst expandtab