~bzr-pqm/bzr/bzr.dev

# Copyright (C) 2006-2010 Canonical Ltd

#

# This program is free software; you can redistribute it and/or modify

# it under the terms of the GNU General Public License as published by

# the Free Software Foundation; either version 2 of the License, or

# (at your option) any later version.

#

# This program is distributed in the hope that it will be useful,

# but WITHOUT ANY WARRANTY; without even the implied warranty of

# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

# GNU General Public License for more details.

#

# You should have received a copy of the GNU General Public License

# along with this program; if not, write to the Free Software

# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA

"""On-disk mutex protecting a resource

bzr on-disk objects are locked by the existence of a directory with a

particular name within the control directory.  We use this rather than OS

internal locks (such as flock etc) because they can be seen across all

transports, including http.

Objects can be read if there is only physical read access; therefore

readers can never be required to create a lock, though they will

check whether a writer is using the lock.  Writers can't detect

whether anyone else is reading from the resource as they write.

This works because of ordering constraints that make sure readers

see a consistent view of existing data.

Waiting for a lock must be done by polling; this can be aborted after

a timeout.

Locks must always be explicitly released, typically from a try/finally

block -- they are not released from a finalizer or when Python

exits.

Locks may fail to be released if the process is abruptly terminated

(machine stop, SIGKILL) or if a remote transport becomes permanently

disconnected.  There is therefore a method to break an existing lock.

This should rarely be used, and generally only with user approval.

Locks contain some information on when the lock was taken and by who

which may guide in deciding whether it can safely be broken.  (This is

similar to the messages displayed by emacs and vim.) Note that if the

lock holder is still alive they will get no notification that the lock

has been broken and will continue their work -- so it is important to be

sure they are actually dead.

A lock is represented on disk by a directory of a particular name,

containing an information file.  Taking a lock is done by renaming a

temporary directory into place.  We use temporary directories because

for all known transports and filesystems we believe that exactly one

attempt to claim the lock will succeed and the others will fail.  (Files

won't do because some filesystems or transports only have

rename-and-overwrite, making it hard to tell who won.)

The desired characteristics are:

* Locks are not reentrant.  (That is, a client that tries to take a

  lock it already holds may deadlock or fail.)

* Stale locks can be guessed at by a heuristic

* Lost locks can be broken by any client

* Failed lock operations leave little or no mess

* Deadlocks are avoided by having a timeout always in use, clients

  desiring indefinite waits can retry or set a silly big timeout.

Storage formats use the locks, and also need to consider concurrency

issues underneath the lock.  A format may choose not to use a lock

at all for some operations.

LockDirs always operate over a Transport.  The transport may be readonly, in

which case the lock can be queried but not acquired.

Locks are identified by a path name, relative to a base transport.

Calling code will typically want to make sure there is exactly one LockDir

object per actual lock on disk.  This module does nothing to prevent aliasing

and deadlocks will likely occur if the locks are aliased.

In the future we may add a "freshen" method which can be called

by a lock holder to check that their lock has not been broken, and to

update the timestamp within it.

Example usage:

>>> from bzrlib.transport.memory import MemoryTransport

>>> # typically will be obtained from a BzrDir, Branch, etc

>>> t = MemoryTransport()

>>> l = LockDir(t, 'sample-lock')

>>> l.create()

>>> token = l.wait_lock()

>>> # do something here

>>> l.unlock()

"""

# TODO: We sometimes have the problem that our attempt to rename '1234' to

# 'held' fails because the transport server moves into an existing directory,

# rather than failing the rename.  If we made the info file name the same as

# the locked directory name we would avoid this problem because moving into

# the held directory would implicitly clash.  However this would not mesh with

# the existing locking code and needs a new format of the containing object.

# -- robertc, mbp 20070628

import os

import time

from bzrlib import (

    debug,

    errors,

    lock,

    osutils,

    )

import bzrlib.config

from bzrlib.decorators import only_raises

from bzrlib.errors import (

        DirectoryNotEmpty,

        FileExists,

        LockBreakMismatch,

        LockBroken,

        LockContention,

        LockFailed,

        LockNotHeld,

        NoSuchFile,

        PathError,

        ResourceBusy,

        TransportError,

        )

from bzrlib.trace import mutter, note

from bzrlib.osutils import format_delta, rand_chars, get_host_name

import bzrlib.ui

from bzrlib.lazy_import import lazy_import

lazy_import(globals(), """

from bzrlib import rio

""")

# XXX: At the moment there is no consideration of thread safety on LockDir

# objects.  This should perhaps be updated - e.g. if two threads try to take a

# lock at the same time they should *both* get it.  But then that's unlikely

# to be a good idea.

# TODO: Perhaps store some kind of note like the bzr command line in the lock

# info?

# TODO: Some kind of callback run while polling a lock to show progress

# indicators.

# TODO: Make sure to pass the right file and directory mode bits to all

# files/dirs created.

_DEFAULT_TIMEOUT_SECONDS = 300

_DEFAULT_POLL_SECONDS = 1.0

class LockDir(lock.Lock):

    """Write-lock guarding access to data.

    """

    __INFO_NAME = '/info'

    def __init__(self, transport, path, file_modebits=0644, dir_modebits=0755):

        """Create a new LockDir object.

        The LockDir is initially unlocked - this just creates the object.

        :param transport: Transport which will contain the lock

        :param path: Path to the lock within the base directory of the

            transport.

        """

        self.transport = transport

        self.path = path

        self._lock_held = False

        self._locked_via_token = False

        self._fake_read_lock = False

        self._held_dir = path + '/held'

        self._held_info_path = self._held_dir + self.__INFO_NAME

        self._file_modebits = file_modebits

        self._dir_modebits = dir_modebits

        self._report_function = note

    def __repr__(self):

        return '%s(%s%s)' % (self.__class__.__name__,

                             self.transport.base,

                             self.path)

    is_held = property(lambda self: self._lock_held)

    def create(self, mode=None):

        """Create the on-disk lock.

        This is typically only called when the object/directory containing the

        directory is first created.  The lock is not held when it's created.

        """

        self._trace("create lock directory")

        try:

            self.transport.mkdir(self.path, mode=mode)

        except (TransportError, PathError), e:

            raise LockFailed(self, e)

    def _attempt_lock(self):

        """Make the pending directory and attempt to rename into place.

        If the rename succeeds, we read back the info file to check that we

        really got the lock.

        If we fail to acquire the lock, this method is responsible for

        cleaning up the pending directory if possible.  (But it doesn't do

        that yet.)

        :returns: The nonce of the lock, if it was successfully acquired.

        :raises LockContention: If the lock is held by someone else.  The exception

            contains the info of the current holder of the lock.

        """

        self._trace("lock_write...")

        start_time = time.time()

        try:

            tmpname = self._create_pending_dir()

        except (errors.TransportError, PathError), e:

            self._trace("... failed to create pending dir, %s", e)

            raise LockFailed(self, e)

        try:

            self.transport.rename(tmpname, self._held_dir)

        except (errors.TransportError, PathError, DirectoryNotEmpty,

                FileExists, ResourceBusy), e:

            self._trace("... contention, %s", e)

            self._remove_pending_dir(tmpname)

            raise LockContention(self)

        except Exception, e:

            self._trace("... lock failed, %s", e)

            self._remove_pending_dir(tmpname)

            raise

        # We must check we really got the lock, because Launchpad's sftp

        # server at one time had a bug were the rename would successfully

        # move the new directory into the existing directory, which was

        # incorrect.  It's possible some other servers or filesystems will

        # have a similar bug allowing someone to think they got the lock

        # when it's already held.

        #

        # See <https://bugs.edge.launchpad.net/bzr/+bug/498378> for one case.

        #

        # Strictly the check is unnecessary and a waste of time for most

        # people, but probably worth trapping if something is wrong.

        info = self.peek()

        self._trace("after locking, info=%r", info)

        if info is None:

            raise LockFailed(self, "lock was renamed into place, but "

                "now is missing!")

        if info['nonce'] != self.nonce:

            self._trace("rename succeeded, "

                "but lock is still held by someone else")

            raise LockContention(self)

        self._lock_held = True

        self._trace("... lock succeeded after %dms",

                (time.time() - start_time) * 1000)

        return self.nonce

    def _remove_pending_dir(self, tmpname):

        """Remove the pending directory

        This is called if we failed to rename into place, so that the pending

        dirs don't clutter up the lockdir.

        """

        self._trace("remove %s", tmpname)

        try:

            self.transport.delete(tmpname + self.__INFO_NAME)

            self.transport.rmdir(tmpname)

        except PathError, e:

            note("error removing pending lock: %s", e)

    def _create_pending_dir(self):

        tmpname = '%s/%s.tmp' % (self.path, rand_chars(10))

        try:

            self.transport.mkdir(tmpname)

        except NoSuchFile:

            # This may raise a FileExists exception

            # which is okay, it will be caught later and determined

            # to be a LockContention.

            self._trace("lock directory does not exist, creating it")

            self.create(mode=self._dir_modebits)

            # After creating the lock directory, try again

            self.transport.mkdir(tmpname)

        self.nonce = rand_chars(20)

        info_bytes = self._prepare_info()

        # We use put_file_non_atomic because we just created a new unique

        # directory so we don't have to worry about files existing there.

        # We'll rename the whole directory into place to get atomic

        # properties

        self.transport.put_bytes_non_atomic(tmpname + self.__INFO_NAME,

                                            info_bytes)

        return tmpname

    @only_raises(LockNotHeld, LockBroken)

    def unlock(self):

        """Release a held lock

        """

        if self._fake_read_lock:

            self._fake_read_lock = False

            return

        if not self._lock_held:

            return lock.cant_unlock_not_held(self)

        if self._locked_via_token:

            self._locked_via_token = False

            self._lock_held = False

        else:

            old_nonce = self.nonce

            # rename before deleting, because we can't atomically remove the

            # whole tree

            start_time = time.time()

            self._trace("unlocking")

            tmpname = '%s/releasing.%s.tmp' % (self.path, rand_chars(20))

            # gotta own it to unlock

            self.confirm()

            self.transport.rename(self._held_dir, tmpname)

            self._lock_held = False

            self.transport.delete(tmpname + self.__INFO_NAME)

            try:

                self.transport.rmdir(tmpname)

            except DirectoryNotEmpty, e:

                # There might have been junk left over by a rename that moved

                # another locker within the 'held' directory.  do a slower

                # deletion where we list the directory and remove everything

                # within it.

                #

                # Maybe this should be broader to allow for ftp servers with

                # non-specific error messages?

                self._trace("doing recursive deletion of non-empty directory "

                        "%s", tmpname)

                self.transport.delete_tree(tmpname)

            self._trace("... unlock succeeded after %dms",

                    (time.time() - start_time) * 1000)

            result = lock.LockResult(self.transport.abspath(self.path),

                                     old_nonce)

            for hook in self.hooks['lock_released']:

                hook(result)

    def break_lock(self):

        """Break a lock not held by this instance of LockDir.

        This is a UI centric function: it uses the bzrlib.ui.ui_factory to

        prompt for input if a lock is detected and there is any doubt about

        it possibly being still active.

        """

        self._check_not_locked()

        holder_info = self.peek()

        if holder_info is not None:

            lock_info = '\n'.join(self._format_lock_info(holder_info))

            if bzrlib.ui.ui_factory.get_boolean("Break %s" % lock_info):

                self.force_break(holder_info)

    def force_break(self, dead_holder_info):

        """Release a lock held by another process.

        WARNING: This should only be used when the other process is dead; if

        it still thinks it has the lock there will be two concurrent writers.

        In general the user's approval should be sought for lock breaks.

        dead_holder_info must be the result of a previous LockDir.peek() call;

        this is used to check that it's still held by the same process that

        the user decided was dead.  If this is not the current holder,

        LockBreakMismatch is raised.

        After the lock is broken it will not be held by any process.

        It is possible that another process may sneak in and take the

        lock before the breaking process acquires it.

        """

        if not isinstance(dead_holder_info, dict):

            raise ValueError("dead_holder_info: %r" % dead_holder_info)

        self._check_not_locked()

        current_info = self.peek()

        if current_info is None:

            # must have been recently released

            return

        if current_info != dead_holder_info:

            raise LockBreakMismatch(self, current_info, dead_holder_info)

        tmpname = '%s/broken.%s.tmp' % (self.path, rand_chars(20))

        self.transport.rename(self._held_dir, tmpname)

        # check that we actually broke the right lock, not someone else;

        # there's a small race window between checking it and doing the

        # rename.

        broken_info_path = tmpname + self.__INFO_NAME

        broken_info = self._read_info_file(broken_info_path)

        if broken_info != dead_holder_info:

            raise LockBreakMismatch(self, broken_info, dead_holder_info)

        self.transport.delete(broken_info_path)

        self.transport.rmdir(tmpname)

        result = lock.LockResult(self.transport.abspath(self.path),

                                 current_info.get('nonce'))

        for hook in self.hooks['lock_broken']:

            hook(result)

    def _check_not_locked(self):

        """If the lock is held by this instance, raise an error."""

        if self._lock_held:

            raise AssertionError("can't break own lock: %r" % self)

    def confirm(self):

        """Make sure that the lock is still held by this locker.

        This should only fail if the lock was broken by user intervention,

        or if the lock has been affected by a bug.

        If the lock is not thought to be held, raises LockNotHeld.  If

        the lock is thought to be held but has been broken, raises

        LockBroken.

        """

        if not self._lock_held:

            raise LockNotHeld(self)

        info = self.peek()

        if info is None:

            # no lock there anymore!

            raise LockBroken(self)

        if info.get('nonce') != self.nonce:

            # there is a lock, but not ours

            raise LockBroken(self)

    def _read_info_file(self, path):

        """Read one given info file.

        peek() reads the info file of the lock holder, if any.

        """

        return self._parse_info(self.transport.get_bytes(path))

    def peek(self):

        """Check if the lock is held by anyone.

        If it is held, this returns the lock info structure as a rio Stanza,

        which contains some information about the current lock holder.

        Otherwise returns None.

        """

        try:

            info = self._read_info_file(self._held_info_path)

            self._trace("peek -> held")

            return info

        except NoSuchFile, e:

            self._trace("peek -> not held")

    def _prepare_info(self):

        """Write information about a pending lock to a temporary file.

        """

        # XXX: is creating this here inefficient?

        config = bzrlib.config.GlobalConfig()

        try:

            user = config.user_email()

        except errors.NoEmailInUsername:

            user = config.username()

        s = rio.Stanza(hostname=get_host_name(),

                   pid=str(os.getpid()),

                   start_time=str(int(time.time())),

                   nonce=self.nonce,

                   user=user,

                   )

        return s.to_string()

    def _parse_info(self, info_bytes):

        # TODO: Handle if info_bytes is empty

        return rio.read_stanza(osutils.split_lines(info_bytes)).as_dict()

    def attempt_lock(self):

        """Take the lock; fail if it's already held.

        If you wish to block until the lock can be obtained, call wait_lock()

        instead.

        :return: The lock token.

        :raises LockContention: if the lock is held by someone else.

        """

        if self._fake_read_lock:

            raise LockContention(self)

        result = self._attempt_lock()

        hook_result = lock.LockResult(self.transport.abspath(self.path),

                self.nonce)

        for hook in self.hooks['lock_acquired']:

            hook(hook_result)

        return result

    def wait_lock(self, timeout=None, poll=None, max_attempts=None):

        """Wait a certain period for a lock.

        If the lock can be acquired within the bounded time, it

        is taken and this returns.  Otherwise, LockContention

        is raised.  Either way, this function should return within

        approximately `timeout` seconds.  (It may be a bit more if

        a transport operation takes a long time to complete.)

        :param timeout: Approximate maximum amount of time to wait for the

        lock, in seconds.

        :param poll: Delay in seconds between retrying the lock.

        :param max_attempts: Maximum number of times to try to lock.

        :return: The lock token.

        """

        if timeout is None:

            timeout = _DEFAULT_TIMEOUT_SECONDS

        if poll is None:

            poll = _DEFAULT_POLL_SECONDS

        # XXX: the transport interface doesn't let us guard against operations

        # there taking a long time, so the total elapsed time or poll interval

        # may be more than was requested.

        deadline = time.time() + timeout

        deadline_str = None

        last_info = None

        attempt_count = 0

        while True:

            attempt_count += 1

            try:

                return self.attempt_lock()

            except LockContention:

                # possibly report the blockage, then try again

                pass

            # TODO: In a few cases, we find out that there's contention by

            # reading the held info and observing that it's not ours.  In

            # those cases it's a bit redundant to read it again.  However,

            # the normal case (??) is that the rename fails and so we

            # don't know who holds the lock.  For simplicity we peek

            # always.

            new_info = self.peek()

            if new_info is not None and new_info != last_info:

                if last_info is None:

                    start = 'Unable to obtain'

                else:

                    start = 'Lock owner changed for'

                last_info = new_info

                formatted_info = self._format_lock_info(new_info)

                if deadline_str is None:

                    deadline_str = time.strftime('%H:%M:%S',

                                                 time.localtime(deadline))

                lock_url = self.transport.abspath(self.path)

                # See <https://bugs.edge.launchpad.net/bzr/+bug/250451>

                # the URL here is sometimes not one that is useful to the

                # user, perhaps being wrapped in a lp-%d or chroot decorator,

                # especially if this error is issued from the server.

                self._report_function('%s %s\n'

                    '%s\n' # held by

                    '%s\n' # locked ... ago

                    'Will continue to try until %s, unless '

                    'you press Ctrl-C.\n'

                    'See "bzr help break-lock" for more.',

                    start,

                    formatted_info[0],

                    formatted_info[1],

                    formatted_info[2],

                    deadline_str,

                    )

            if (max_attempts is not None) and (attempt_count >= max_attempts):

                self._trace("exceeded %d attempts")

                raise LockContention(self)

            if time.time() + poll < deadline:

                self._trace("waiting %ss", poll)

                time.sleep(poll)

            else:

                self._trace("timeout after waiting %ss", timeout)

                raise LockContention(self)

    def leave_in_place(self):

        self._locked_via_token = True

    def dont_leave_in_place(self):

        self._locked_via_token = False

    def lock_write(self, token=None):

        """Wait for and acquire the lock.

        :param token: if this is already locked, then lock_write will fail

            unless the token matches the existing lock.

        :returns: a token if this instance supports tokens, otherwise None.

        :raises TokenLockingNotSupported: when a token is given but this

            instance doesn't support using token locks.

        :raises MismatchedToken: if the specified token doesn't match the token

            of the existing lock.

        A token should be passed in if you know that you have locked the object

        some other way, and need to synchronise this object's state with that

        fact.

        XXX: docstring duplicated from LockableFiles.lock_write.

        """

        if token is not None:

            self.validate_token(token)

            self.nonce = token

            self._lock_held = True

            self._locked_via_token = True

            return token

        else:

            return self.wait_lock()

    def lock_read(self):

        """Compatibility-mode shared lock.

        LockDir doesn't support shared read-only locks, so this

        just pretends that the lock is taken but really does nothing.

        """

        # At the moment Branches are commonly locked for read, but

        # we can't rely on that remotely.  Once this is cleaned up,

        # reenable this warning to prevent it coming back in

        # -- mbp 20060303

        ## warn("LockDir.lock_read falls back to write lock")

        if self._lock_held or self._fake_read_lock:

            raise LockContention(self)

        self._fake_read_lock = True

    def _format_lock_info(self, info):

        """Turn the contents of peek() into something for the user"""

        lock_url = self.transport.abspath(self.path)

        delta = time.time() - int(info['start_time'])

        return [

            'lock %s' % (lock_url,),

            'held by %(user)s on host %(hostname)s [process #%(pid)s]' % info,

            'locked %s' % (format_delta(delta),),

            ]

    def validate_token(self, token):

        if token is not None:

            info = self.peek()

            if info is None:

                # Lock isn't held

                lock_token = None

            else:

                lock_token = info.get('nonce')

            if token != lock_token:

                raise errors.TokenMismatch(token, lock_token)

            else:

                self._trace("revalidated by token %r", token)

    def _trace(self, format, *args):

        if 'lock' not in debug.debug_flags:

            return

        mutter(str(self) + ": " + (format % args))